Jump to content
SAU Community

Recommended Posts

Hi guys,

Just got my first skyline 2 weeks ago been haveing a blast in it. So far I have put in a new sterio and an immobiliser, I am now looking at getting a auto turbo timer.

What I would like to know is whats the difference between the expensive Apexi, Blitz etc... and the other auto turbo timers they sell over here at autobarn, supercheap auto, repco etc...

Ideally I would like the timer to go under the car sterio because there is a huge gap there from where the old jap sterio use to be.

So any ideas guys on where to get a reasonably good one that dosent cost me too much to purchace and get fitted.

Thanks.

i bought my greddy turbo timer from bt-revolutions - then got it installed at RE Customs.

Any of the sponsers of SAU will be worth while checking. I got the greddy one cos its a turbo timer, and also calculates the 0-100 time and 0-400m etc....but the other good one is the Apexi timer, but thats only a timer.

Edit - the HKS one is a bit more expensive, but the autobarn guys keep saying that its caused their customers a lot of problems. I dont know how true that is - but i dont trust autobarn cos the dickhead (must be like 20 years old and working as a casual) gave me the wrong wheel lock nuts and said that he is sure it will fit my wheels.... So my advise is to go to someone who knows their stuff, a proper import mechanic or stores that deal with imports and accessories for imports.....

Edited by emsta2003

my greddy FAT broke within like 12months or something.. meanwhile the HKS Type 1 (on diff car) has been going for nearly 5 yrs now.. Haven't tried the Blitz but personally I think its ugly.

My other half said bring over some beer and he'll install it for it you.. but we're in Lalor/Epping.. so depends how far away you are.

Best bet is to get a HKS with a harness.. Jaycar have cheap turbo timers as well but you have to assemble them, I think there's a group buy going atm through funkymonkey/Shan.. don't get a TT from Autobarn caus they're ridiculously priced (high overheads what can you do).

How about you DON'T buy one and save both the money of the timer and install?

You need a turbo timer as much as a glorified Lancer needs a vortex generator.

Biggest wastes of money ever - just drive the car easily for 2-3 minutes before you stop - or if you are at the track, let it run for a while in the pits and cool down.

Now buy me a case of Carlton Draught and you'll still be $60 ahead.

Throw Andrew from Kudos Motorsport (sponsor on here) a PM about his Pivot Super Baby Timers, good price and nice and simple to fit and use, although IMO a very popular choice is the apexi T/T because of its extra functions and price Usually around the $120 mark.

Im personally about to buy a Pivot TT and install myself, if u can install a deck, a TT is just as easy :)

thats all good in theory til you are in a super late rush and the last thing you're thinking about is driving easy :)

Turbo timer = easy, lazy and you can just forget all about it

and that is the exact reason I haven't sold mine, and still want to get it fitted ;)

Won't use it half the time, like this wanker at the petrol station today, but its good to have when running late, when you're most likely on boost until you park it :)

The dude at the servo today cruised into the servo just before me (so I know for a fact he was taking it easy), and stood at the pump waiting for about 60 seconds while the turbo timer ran. I had almost filled up and paid before he started ;)

Oh and Kel, if you know how to install a TT into an alarm with a TT interface, then do mine for me please ;)

The dude at the servo today cruised into the servo just before me (so I know for a fact he was taking it easy), and stood at the pump waiting for about 60 seconds while the turbo timer ran. I had almost filled up and paid before he started :)

are you sure you aren't mistaking me for a man caus I did the same thing today hehe :)

do you drive a green s14? :)

I thought it was funny...I'm not one to turn off my car straight away....but when i've cruised off boost entirely, and pull in to fill up, I dont sit there and wait...was funnier because he was out of the car standing there with the fuel door open waiting :)

I'm with Roy on this one. But you can keep the Carlton, so you'll be even further ahead.

thats all good in theory til you are in a super late rush and the last thing you're thinking about is driving easy :)
Then you need too plan better. And whatever you are heading for will still be there in the 30 seconds you lose by driving sensibly.
Turbo timer = ... lazy...
Exactly!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
    • Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
×
×
  • Create New...