Jump to content
SAU Community

Recommended Posts

Interesting... i did my one 300+ km per hr on GTR32 with few mods on the engine on it. Will like to try more in future :P

Is that using the stock speedo as your reference?

If so, its probably cloer to 250km/h the speedo would be out that far. ;)

R32 GTR....270 stock......Doubt it.

I reckon 240 would be a more realistic.....mines modified (315hp@wheels) and I'd rate its top speed realistically in the region of 240-250kmh.

Wheels mag tested a standard R32 GT-R at Lang Lang back in the early 90's, along with other cars, for the Top Speed Shootout. I recall the Holden engineers (who use the proving ground) said that tyre scrub around the curved track will cause a reduction of about 3-4% in top speeds.

The F40 there on the day could only manage 299km/h (they have been tested to 324km/h in a straight line), the GT-R 245 clicks. Factoring in that the day was very hot (obviously bad for the turbo cars), you would have to assume that the % speed loss for the GT-R and the F40 would be the same, so 245 X 1.08 = 262km/h

But, meh- who really cares.

Is that using the stock speedo as your reference?

If so, its probably cloer to 250km/h the speedo would be out that far. :D

I really doubt the speedo is more than 10% out probably more like 5%

If u can do the math thats no where near 250km/hr if the speedo is reading 300!

enjoy

Really who cares...Apart from the academics and bench racing aspects. Tuners use the 300kmh deal as a selling point or as "proof" of the potency of their tunes/part/philosophy/t-shirt - Top Secret, Mines. Same for vehicle manufacturers...Mclaren, Ferrari, RUF "its a supercar" Meh. It makes great youtube etc but its serious sh1t and these guys put big bucks into their experiments before trying the 300 "barrier"

My concern would be the effects of a component failure at 180mph+ it all happens pretty quick and you wouldnt have enough time to react..unless your a pro.

I've driven some fast and quick cars and I dont see the attraction of high speeds in an uncontrolled, non competitive environment, I guess i dont get it :D

the GT-R 245 clicks. Factoring in that the day was very hot (obviously bad for the turbo cars), you would have to assume that the % speed loss for the GT-R and the F40 would be the same, so 245 X 1.08 = 262km/h

Bah...I still say the realistic top speed of a stock R32 GTR is 240kmh...to quote anything else involves to much speculation about perfect world scenarios.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...