Jump to content
SAU Community

Recommended Posts

But if the same copper see's him once, and then 2-3 months later... and with WA plates its a standout for sure.

Questions will be asked... questions you dont really want.

Unless i was mistaken about how the rules work... you cant have a car rego'd in WA and be living in Vic (over 3 months) even if you have a residential address, its not classed as your residence if your not living there permanently

I looked into this a fair bit before taking a contract in WA. The story is that Melb is my home and my place of primary residence....I am simply in WA for work on a temporary basis. As I am returning to Melb when my work is finished here there is no point changing everything to WA stuff, as two weeks later I could be sent home (ah the joys of contracting :no: ).

As a result the '3 month' rule has no application here. Yes it is true what you say about interstate plates sticking out but while I have been here I haven't been pulled over once, so as long as you are not driving like a tool it shouldn't be an issue.

If push comes to shove I guess it would depend on the type of contract/job that Jason is taking in Vic...

Oh and the 100mm rule is the same in Vic and applies from the ground to the lowest point of the vehicle, whether it be exhaust ,chassis or otherwise.

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

If push comes to shove I guess it would depend on the type of contract/job that Jason is taking in Vic...

Oh and the 100mm rule is the same in Vic and applies from the ground to the lowest point of the vehicle, whether it be exhaust ,chassis or otherwise.

I was thinking of saying the same sort of thing if I got pulled over.

It is set to 100mm from the base of the front bar just in front of the front wheels, which seems as the lowest point on the car.

I have a similar sort of question. My car is registered in Victoria (my parents live in Vic and QLD about 50:50 per year, vic in summer and qld during winter) and the car is under my dads name.

I live in NSW now and spend most of my time in NSW with the car.

If i get pulled over in NSW and defected, do i have to go and get it cleared in vic, can they make me? or will i have to get it cleared in NSW?

Do they have any rule about where it is registered if it is my "dads" car and I am just borrowing it if he has a residential address in Vic?

So was it a good experience with the secret or a bad one? :P

The height is sitting on 100mm which is the legal limit here...is it the same in Vic?

Thanks for all the info guys :)

100mm without you in it? Cause 100mm is right on the limit here.

They are allowed to measure it fully laden, so 3 fat cops get in, your gonna be under 100mm.

I would suggest raising it to 120/130mm if you can, it could save you hassle later on

Are you coming over here are a perm contract or what Jason?

My stuff is only worst case. If a cop sees you twice over 4-5 months he will come hassle you. Its just how they are here.

Nice car Jason............Do you look young?

Cause your such a easy target here.

Tell you what you do....as everyone else has said.

Take stickers (shopping list) off...increase your ride height....get 2 resinators fitted to exhaust.

Also, rap your Turbo in a black thermal shield and have the engine bay and all your shinny bits painted black.

This way when they look under your bonnet they won't be blinded by all the polished and Chrome work you

got going on there :P .(Just Kidding) :)

Also you are 21 years of age.. so...power to weight ratio applies in Victoria...not that they(Police) are to interested in that so much.

Good luck

I would suggest raising it to 120/130mm if you can, it could save you hassle later on

Are you coming over here are a perm contract or what Jason?

My stuff is only worst case. If a cop sees you twice over 4-5 months he will come hassle you. Its just how they are here.

I can raise the suspension without much trouble. I work in I.T. so could easily say that I float between the 2 states. Will be looking at either contract or perm

Nice car Jason............Do you look young?

Cause your such a easy target here.

Tell you what you do....as everyone else has said.

Take stickers (shopping list) off...increase your ride height....get 2 resinators fitted to exhaust.

Also, rap your Turbo in a black thermal shield and have the engine bay and all your shinny bits painted black.

This way when they look under your bonnet they won't be blinded by all the polished and Chrome work you

got going on there :P .(Just Kidding) :)

Also you are 21 years of age.. so...power to weight ratio applies in Victoria...not that they(Police) are to interested in that so much.

Good luck

Thanks :) ...I am 31, so probably dont look that young ;)

If you can float, then you can keep it all WA easy enough

Its only if its perma setting that you might find yourself with the more painful issues

If your just a contracting then you should be easily over the line.

Especially if you go back to WA once or twice during the melb visit.

How long you over here for anyways?

You better like beers to mate, as a number of us live near where your aiming for :P

If you can float, then you can keep it all WA easy enough

Its only if its perma setting that you might find yourself with the more painful issues

If your just a contracting then you should be easily over the line.

Especially if you go back to WA once or twice during the melb visit.

How long you over here for anyways?

You better like beers to mate, as a number of us live near where your aiming for ;)

Might be a permanent role, but they wouldn't know that right? I have been thinking of contracting for a while first. There is no time limit, but it could be a few years or more :verymad: The car will then be driven less and less on the road.

No problem with the beer :thumbsup: I dont mind a beer or four at all ;)

just say ur on holidays/work and travel 2 and from all the time... then tell the cop 2 suck u sideways cos there aint crap he can do :verymad:

also out of curiosity if u get pulled over by a cop n he tells u that u need 2 go c the epa in a few days time and u tell him ur going back to perth b4 that date, what happens then?

be prepared for some ass reaming down here

haha what is with the such strict laws there? seems so much stricter than all other states. :(

just say ur on holidays/work and travel 2 and from all the time... then tell the cop 2 suck u sideways cos there aint crap he can do :)

also out of curiosity if u get pulled over by a cop n he tells u that u need 2 go c the epa in a few days time and u tell him ur going back to perth b4 that date, what happens then?

Thats what I was thinking...that if I travel back and forth, and will not be long term permanent in Melbourne then I shouldn't have to switch rego over :P Will see how it goes...if it's bad, she might spend most of the time in the garage...the car that is :D hehe

Man

I was in your situation 2 years ago.

I used lived in Perth and I had a R32 with a RB25DET that was extensively modded (to say the least).

Brought it here to Melbourne when I moved.

After 2 weeks Got dicked with every fine under the sun, no engineering, turbo, management you name it I got reamed. EPA but no defect.

Ended up sending the car back to my parents in Perth and I sold it there.

If you have WA plates it will only give you more attention. They cant defect you, but they can EPA you.

Its really up to you what you wanna do. You should be pretty safe.

brighton has porsches and ferraris - but down beach rd i have seen a fair few imports.

This might be a very long way of doing things, but cant he borrow stock parts, install them, get the car registered and what not and then put back the mods? Thats if he wants to have Vic registration?

You still have to drive around with the mods on though, so a major defect results in having to pull it all off again, let alone the EPA.

With the level of modification on the car this would also be a costly/time consuming process.

haha cool :kiss: I will let you know when I arrive and we can go over the safe areas :)

what is the problem with driving at night?

It will mostly be a weekender only, and it sounds like tht is the way to keep it :)

You will be more likely to get pulled over at night. How often do you see cars being pulled over in the rush hour/during the business day vs at night (it does happen but compared to people being pulled over at night is much lower). Most of the pulled over posts I have seen have been from the evening.

Anyway good luck with the move and as a weekender, I would have thought you will be fairly safe anyway. :kiss:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
    • Regardless of neglect or incompetence, fixing either is tedious and annoying. Most of the neglect on my car is definitely rust. I hope I can at least pass inspections later on and they won't fail the car due to slightly corroded hardlines. I was generous with rust converter and wax and it looks ok, most lines in the rear are hard to see properly anyways.  Definitely will test them though to make sure they don't rupture under pressure, in that case the car isn't going anywhere this year.
×
×
  • Create New...