Jump to content
SAU Community

Recommended Posts

Over the last two tanks of petrol that I've used, my car seems to be guzzling it down like theres no tomorrow. I thought it might have just been doing it's normal thing of having a bad tank of petrol and then getting heaps of k's out of the next tank.

This wasn't the case. Then I went down the coast sat night on our cruise and it used 1/2 a tank of petrol. That was just with normal driving and no hard acceleration. It doesn't seem to have the pick up it normally does.

If the turbo's blown, it wouldn't be making boost... right?

Also, when I first start the car it idles at 1500rpm and seems to drop spasmodically when ever it wants, meaning it doesn't idle like that until it gets to running temperature (sometimes it just keeps ideling like this until I turn it off). I find that if I rev it to 3000rpm for about 3 seconds the rev's seem to drop and stay at around 700/800rpm (normal idleing) sometimes 1100rpm.

Could this have something to do with the injectors?

Auto choke not working properly??

Or someone said something about cam belt/gears or something. I just heard the part of $600 to fix it and died. Apparently these should be done around the 100,000km mark.....

I soo ****en wish I could get streetmachines for some of this shit, It's just one thing after another and quite frankly, I'm ****en sick of it.

Any thoughts or recommendations would be appreciated. I can't get hold of my mechanic until the 28th so I thought I'd ask here first and see if anyone else has had this problem.

Thanks again.

Link to comment
https://www.sau.com.au/forums/topic/14342-i-think-somethings-wrong/
Share on other sites

Hmmm, not good :)

To me it sounds like your air flow meter is playing silly buggers.

You've got the same symptoms that other people have had when theirs have needed a good clean or replacement.

Apart from that, it could be your O2 sensor if it's going through lots of fuel, but the O2 sensor doesn't usually make the idle go wierd like what your experancing.....

Your right about the turbo, if it's stuffed (wheel spun off) it won't make any boost.

I hope you get it sorted.

J

Humm.

I recently had really bad fuel economy, but recently I just changed the O2 sensor. Haven't been able to test it out yet, but it appears to of fixed the problem!! woohoo!

Also, then the dickhead did my timing belt (under warranty) he adjusted it 2 teeth out on the exhaust cam. That caused it to ruff idle.

Thats what happend with me anyway. The other guys seem to be on track with the AFM. I heard to use the non-resedue carby cleaner on that.

Can I just by this stuff from supercheap?? I'm not game enough to clean anything on my car incase I break something :)

I'll get Andrew to try and clean it and see what happens. I might just wait to reset the ECU until the weekends over. I don't really wanna be caught fanging it when its double points, double fines.

How long do you have to fang it for when you reset the ecu??

Dont panic and do the little things first, give the AFM a squirt with some circuit board cleaner,

put some Nulon Injector cleaner in the tank, (the ones that has 2 hits in one bottle... use the whole thing in one full tank)

And how long has it been since you have changed plugs, wouldnt hurt to gap some cheap copper plugs and throw them in, my Iridiums are claimed to last 80,000kms but i notice an increase in economy and grunt (cleaner up high in the revs) with new plugs every 20,000kms.

I think my car is hard on plugs because it pings a little and i run jungle juice from time to time.

Maybe on the 28th of April when Gavin reopens I should take the car down to him and say "fix... Broken" :|

I'm not game enough to touch anything incase I stuff it up. I might get him to do a full service and change the plugs and get the injectors cleaned. I've only done like 2000k's on my normal service but :)

Damn cars... Why does it always break.

It's over a year now. It was at the end of march like the 23rd I think..

Theres nothing I can really do because even when there was a problem in the first few months of owning it, they didn't fix it. What's going to make them fix it now? I even rang the MAAQ or what ever it is, the ones that they get the warranty's through, and they said I could go through small claims court but I really don't think its worth having my car stolen and torched by the bikkie gang that owns streetmachines.

Speed sensor, abs, hicas, wires removed, speedo stopping (that problem I've given up on) ... diff leak, then I had to replace the diff (which cost me ubber amounts of $$) because the bearings went .. now the bushes need replacing (which in turn I need new tyres).. Aircon's ****ed itself... and probably the cam things... ERGH.. just one thing after another.

It might not sound a lot to you's but I'm not exactly rich so its a **** of a lot of money to me!

Dude thats buggered... fix whatever ya can to get it back to sorta normal then get rid of it. Ya much better off in a less costly car that lasts forever than a car that costs heaps to buy and costs even more to keep... with all the money you've had to fork out on fixing it, it coulda be fairly decently modded. I reckonz to get rid of it n look for another one, cos they are a lot cheaper nowdays. Best bet is to import one yaself, get hold of an importer (a good one) get friendly with them and then get them to help you purchase a car off an auction and let them import it for u. Thats what i did, and i havn't had one problem at all with my car and i got it for far less than what it would have sold for in the yard ($8,000 less!!).

Either way tho dude, think of what ya still gotta get fixed and if that much has happened already what else could come. Jus sounds like one of them cars that no matter what ya do or what ya spend ya gunna keep getting things with it. Dunno, but to me with the things that have gone wrong with it, it seems like its been driven hard overseas... ya probs didn't want to hear that but yeah... :S. Sorry dude.

That's what we are meant to get... Or should I say, normally get around 400. ATM i'm getting like around 300 (can't tell cause the odo isn't working)

I'll see what this problem is, if it's something big, I'll fix it and **** it off, if its jsut the AFM dirty (which could just well be it because we've been told the oil air filters (K&N) stuff around with your AFM's) so.. I'll clean that and see what happens. All these problems are from streetmachines. The diff's been ****ed since we got it, the wiring was broken when we bought it (which we didn't know till we got it data streamed) ...

ERGH.. I love it too much to get rid of it :)

"All these problems are from streetmachines"... thats what makes it sound like its been driven hard overseas dude. Not that common for a diff to go unless ya thrash it and it doesn't sound like u do, and for the hicas and that to be disconected is usually a sign of drifting?? Ah well best of luck with it dude hope it all pulls together.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • And if it still spikes, just for now, turn off VCT completely by disabling it OR simply unplug the solenoid. Just to rule out excessive exhaust pressure. I recall a video from Motive DVD about a decade ago, where Hawkins original single Garrett GTX3582 or so turbo had boost control issues sub 1.4bar of boost as well.   Food for thought? Is there anyway you can peg the WG completely open and/or dodgily not plumb it back into your exhaust system for testing purposes?
    • I will endeavour to give it a crack sooner or later. I have the wastegate apart at the moment so I'll replace it with a smaller spring just to see what it does and if I have to go back then so be it.   If it spikes to 23 but can then be controlled back to 20, then the gate must not be 100% open... So if it's not 100% open then why can't it drop the boost even further than 20psi (I understand it's not linear). What a headache this whole thing is.
    • Either the WG is reaching full opening, or it is not. The "it is not" case could only occur if there was not enough time available to swing the valve fully open during that boost event. I would consider that to be unlikely, as this is a commercial product that is in use elsewhere, so it really should work. But in your case, because there is definitely SOMETHING wrong, it should not be assumed that things like that are working as they should. You should put a video camera where it can see the actuator (if at all possible) during a run to see how far it is moving.
    • I think you're mostly on the ball there. With the straight gate, I suspect the weight of the spring will determine how quickly the gate can close, when not run with active pressure drive on both sides of the diaphragm. Otherwise, with drive on both sides of the diaphragm, you could almost go without a spring at all, only needing one to make sure that the thing was actually closed while completely off boost and not having pressure available to drive it closed. Butterfly valves have mostly symmetric loading when there is flow going through them, meaning that the gas hitting the upstream part of the blade is balanced by the gas hitting the downstream part of the blade, which means you don't need actuator torque to overcome any non-symmetric flow induced loads. But the gas flow does impart a purely normal load against the shaft, which transfers into the bush/bearing at each end of the shaft and does increase the torque required to make the shaft turn. Only a little, but it is there. I have no feeling for the amount of force involved in a WG application, but it certainly could make an argument for a decent spring weight being required. But all of this is just peripheral to the actual problem here.
    • The answer to this would be I followed the documentation from Turbosmart which said each spring pressure could achieve a maximum of 5x it's rated pressure so the included smallest spring being the 6psi had a range up to 30psi. I went with the 12 because I figured it'd likely hover around 15psi as a base pressure however I was obviously wrong.    I have a log here that I'll dig out that is purely wastegate and no Mac valve controlling anything.   If it can't hold anywhere near 12psi, does that mean the straight gate is virtually wide open during a run? Or am I thinking about this all wrong.   I could Tee Piece into the cooler pipe pre intercooler where the wastegate gets its feed, and send that to the ecu and see how that reads, I just don't have a spare pressure sensor currently that's all.
×
×
  • Create New...