Jump to content
SAU Community

Recommended Posts

Over the last two tanks of petrol that I've used, my car seems to be guzzling it down like theres no tomorrow. I thought it might have just been doing it's normal thing of having a bad tank of petrol and then getting heaps of k's out of the next tank.

This wasn't the case. Then I went down the coast sat night on our cruise and it used 1/2 a tank of petrol. That was just with normal driving and no hard acceleration. It doesn't seem to have the pick up it normally does.

If the turbo's blown, it wouldn't be making boost... right?

Also, when I first start the car it idles at 1500rpm and seems to drop spasmodically when ever it wants, meaning it doesn't idle like that until it gets to running temperature (sometimes it just keeps ideling like this until I turn it off). I find that if I rev it to 3000rpm for about 3 seconds the rev's seem to drop and stay at around 700/800rpm (normal idleing) sometimes 1100rpm.

Could this have something to do with the injectors?

Auto choke not working properly??

Or someone said something about cam belt/gears or something. I just heard the part of $600 to fix it and died. Apparently these should be done around the 100,000km mark.....

I soo ****en wish I could get streetmachines for some of this shit, It's just one thing after another and quite frankly, I'm ****en sick of it.

Any thoughts or recommendations would be appreciated. I can't get hold of my mechanic until the 28th so I thought I'd ask here first and see if anyone else has had this problem.

Thanks again.

Link to comment
https://www.sau.com.au/forums/topic/14342-i-think-somethings-wrong/
Share on other sites

Hmmm, not good :)

To me it sounds like your air flow meter is playing silly buggers.

You've got the same symptoms that other people have had when theirs have needed a good clean or replacement.

Apart from that, it could be your O2 sensor if it's going through lots of fuel, but the O2 sensor doesn't usually make the idle go wierd like what your experancing.....

Your right about the turbo, if it's stuffed (wheel spun off) it won't make any boost.

I hope you get it sorted.

J

Humm.

I recently had really bad fuel economy, but recently I just changed the O2 sensor. Haven't been able to test it out yet, but it appears to of fixed the problem!! woohoo!

Also, then the dickhead did my timing belt (under warranty) he adjusted it 2 teeth out on the exhaust cam. That caused it to ruff idle.

Thats what happend with me anyway. The other guys seem to be on track with the AFM. I heard to use the non-resedue carby cleaner on that.

Can I just by this stuff from supercheap?? I'm not game enough to clean anything on my car incase I break something :)

I'll get Andrew to try and clean it and see what happens. I might just wait to reset the ECU until the weekends over. I don't really wanna be caught fanging it when its double points, double fines.

How long do you have to fang it for when you reset the ecu??

Dont panic and do the little things first, give the AFM a squirt with some circuit board cleaner,

put some Nulon Injector cleaner in the tank, (the ones that has 2 hits in one bottle... use the whole thing in one full tank)

And how long has it been since you have changed plugs, wouldnt hurt to gap some cheap copper plugs and throw them in, my Iridiums are claimed to last 80,000kms but i notice an increase in economy and grunt (cleaner up high in the revs) with new plugs every 20,000kms.

I think my car is hard on plugs because it pings a little and i run jungle juice from time to time.

Maybe on the 28th of April when Gavin reopens I should take the car down to him and say "fix... Broken" :|

I'm not game enough to touch anything incase I stuff it up. I might get him to do a full service and change the plugs and get the injectors cleaned. I've only done like 2000k's on my normal service but :)

Damn cars... Why does it always break.

It's over a year now. It was at the end of march like the 23rd I think..

Theres nothing I can really do because even when there was a problem in the first few months of owning it, they didn't fix it. What's going to make them fix it now? I even rang the MAAQ or what ever it is, the ones that they get the warranty's through, and they said I could go through small claims court but I really don't think its worth having my car stolen and torched by the bikkie gang that owns streetmachines.

Speed sensor, abs, hicas, wires removed, speedo stopping (that problem I've given up on) ... diff leak, then I had to replace the diff (which cost me ubber amounts of $$) because the bearings went .. now the bushes need replacing (which in turn I need new tyres).. Aircon's ****ed itself... and probably the cam things... ERGH.. just one thing after another.

It might not sound a lot to you's but I'm not exactly rich so its a **** of a lot of money to me!

Dude thats buggered... fix whatever ya can to get it back to sorta normal then get rid of it. Ya much better off in a less costly car that lasts forever than a car that costs heaps to buy and costs even more to keep... with all the money you've had to fork out on fixing it, it coulda be fairly decently modded. I reckonz to get rid of it n look for another one, cos they are a lot cheaper nowdays. Best bet is to import one yaself, get hold of an importer (a good one) get friendly with them and then get them to help you purchase a car off an auction and let them import it for u. Thats what i did, and i havn't had one problem at all with my car and i got it for far less than what it would have sold for in the yard ($8,000 less!!).

Either way tho dude, think of what ya still gotta get fixed and if that much has happened already what else could come. Jus sounds like one of them cars that no matter what ya do or what ya spend ya gunna keep getting things with it. Dunno, but to me with the things that have gone wrong with it, it seems like its been driven hard overseas... ya probs didn't want to hear that but yeah... :S. Sorry dude.

That's what we are meant to get... Or should I say, normally get around 400. ATM i'm getting like around 300 (can't tell cause the odo isn't working)

I'll see what this problem is, if it's something big, I'll fix it and **** it off, if its jsut the AFM dirty (which could just well be it because we've been told the oil air filters (K&N) stuff around with your AFM's) so.. I'll clean that and see what happens. All these problems are from streetmachines. The diff's been ****ed since we got it, the wiring was broken when we bought it (which we didn't know till we got it data streamed) ...

ERGH.. I love it too much to get rid of it :)

"All these problems are from streetmachines"... thats what makes it sound like its been driven hard overseas dude. Not that common for a diff to go unless ya thrash it and it doesn't sound like u do, and for the hicas and that to be disconected is usually a sign of drifting?? Ah well best of luck with it dude hope it all pulls together.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I think the concept is highlighting the various scenarios where thicker oil helps, and thicker oil potentially doesn't help and only generates heat and costs power, in turn for safety which isn't actually any safer (unless you're going real hot). If anything this does highlight why throwing Castrol 10w-60 for your track days is always a solid, safe bet. 
    • Jason should have shown a real viscosity vs temp chart. All the grades have very little viscosity difference at full operating temperature.
    • Oops... I meant to include the connector  view... BR/W - power from fuse L/W - motor negative to fan control amp (and off to HVAC pin19) OR/B - PWM signal (from HVAC pin20) B --  ground  
    • Yep, if you are applying filler it sounds like there is something wrong with the body lol. Safe to assume there is going to be a lot of sanding going on if your still applying fillers.  Picture a perfect bare metal panel, smooth as glass. You lay down your primer, it's perfect. (why are you going to sand it?) You lay down the colour and clear, it's perfect. No sanding at all took place and you've got a perfectly finished panel.  You won't be chasing your tail, sounds like you were prepping to start laying filler. If your happy with the body after the sanding, there is some bare metal exposed and some areas with primer, no issues at all, start laying the filler. You are safe to lay filler on bare metal or primer (of course check your technical data sheet as usual for what your filler is happy to adhere to).  This isn't a 100% correct statement. There is primer that is happy to adhere to smooth bare metal. There are fillers that are happy to adhere to smooth bare metal. Just make sure you're using the right materials for the job.  Typically if you are using filler, you would go primer, colour and clear. I've never seen any instances before where someone has laid colour over body filler (maybe this happens, but I haven't seen it before). So your plan sounds pretty normal to me. 
    • I don't think there's any way someone is push starting this car.. I honestly can barely move it, and moving it and steering it is just flat out not possible. I'm sure it is, but needs a bigger man than me. I have a refurbished starter now. The starter man was quite clear and consise showing me how nothing inside a starter really should contribute to slow cranking, and turned out that for the most part... my starter was entirely fine. Still, some of the wear items were replaced and luckily it didn't show any signs of getting too hot, being unfit for use, etc. Which is 'good'. I also noticed the starter definitely sounded different, which is a bit odd considering nothing should have really changed there.... Removed and refit, and we'll pretend one of the manifold bolts didn't fully tighten up and is only "pretty" tight. GM only wants 18ft/lb anyway. I also found a way to properly get my analog wideband reading very slightly leaner than the serial wideband. There's Greg related reasons for this. The serial output is the absolute source of truth, but it is a total asshole to actually stay connected and needs a laptop. The analog input does not, and works with standalone datalogging. Previously the analog input read slightly richer, but if I am aiming at 12.7 I do not want one of the widebands to be saying 12.7 when the source of truth is 13.0. Now the source of truth will be 12.65 and the Analog Wideband will read 12.7. So when I tune to 12.7 it'll be ever so slightly safer. While messing with all of this and idling extensively I can confirm my car seems to restart better while hot now. I did add an old Skyline battery cable between the head and the body though, though now I really realise I should have chosen the frame. Maybe that's a future job. The internet would have you believe that this is caused by bad grounds. In finding out where my grounds actually were I found out the engine bay battery post actually goes to the engine, as well as a seperate one (from the post) to the body of the car. So now there's a third one making the Grounding Triangle which is now a thing. I also from extensive idling have this graph. Temperature (°C) Voltage (V) 85 1.59 80 1.74 75 1.94 70 2.1 65 2.33 60 2.56 55 2.78 50 2.98 45 3.23 40 3.51 35 3.75 30 4.00   Plotted it looks like this. Which is actually... pretty linear? I have not actually put the formula into HPTuners. I will have to re-engage brain and/or re-engage the people who wanted more data to magically do it for me. Tune should be good for the 30th!
×
×
  • Create New...