Jump to content
SAU Community

Recommended Posts

  • 8 months later...
  • Replies 93
  • Created
  • Last Reply

Top Posters In This Topic

Why does everyone want gay stainless steel manifolds that crack etc heat fatigue, 6 boost manifolds and ones made from steel are 10 times better in theyr can b heated and cooled alot more times without damage plus they have been found to retain more heat and decrese spool up times of liek 2-5% percent from memory because they retain more heat the exhaust gas flow is quicker theirfore making the turbo spool faster, the only downside in weight thats all but if ur actually going to drive ur car ie do afew km's in it wouldnt u want something that is going to last....

Thanks Rory

note a link for some 6 boost manifolds:

http://www.horsepowerinabox.com/HPIAB2/category15_1.htm

i want a 6boost one but there is a bloody 4-6 week wait on them. i need my car back now as its my daily driver and its in peices as my stocker is cracked...

i have been told that the stocker will only crack due to running to lean....??? any comments?

I have recently had my 6boost (SR20) ex manifold and stock SR20 inlet manifold honed by Andrew Sanders (along with my turbo compressor cover). I don't have the before/after flow results on me but will post up later for anyone interested in this process.

OK for what its worth 6Boost ex manifold and standard blacktop inlet manifold (SR20) before and after extrude honing at 28 inches. Please note that my mandate to Andrew Sanders re exhaust manifold was not to equalise flow as I didn't want to increase the volume too much in runners 2 & 3 and loose any response. And my mandate re the inlet manifold was to equalise flow - which is nearly perfect. Just an example of the benefits of extrude honing.

6 Boost Exhaust Manifold

Before.............After

1 250............260

2 220............245

3 222............247

4 252............262

Standard SR 20 Blacktop Inlet Manifold

Before.............After

1 254............300

2 257............306

3 270............306

4 254............300

For comparison sake I pasted this RB exhaust manifold flow data previously posted in this thread but Im not sure at what pressure the flow tests were done?

Some flow rates for you guy's from extrusion flow honing standard manifold ,hks cast iron manifold and hks cast iron flow honed

standard manifold .........hks cast ...............hks cast flow honed

1 159.7.........................170.7............................194.8

2 162.4.........................166.6............................203.4

3 160.7.........................178.7............................198.7

4 150.1.........................183.6............................200.3

5 149.9.........................182.2............................207.8

6 173.3.........................184.7............................202.8

^^^^^ agreed but IMO the 6Boost manifolds has one of the best collectors in the business. Mercury Motorsport made 562 rwhp from their stock stroke sr20 with a 6 boost mani and GT35 turbo. This car also ran 10 sec quarters with manual box.

My manifold is also unique in that it has been custom made to suit one of the new round collector v-band Tial cast stainless housings for my HKS GTRS turbo.

Edited by juggernaut1
i want a 6boost one but there is a bloody 4-6 week wait on them. i need my car back now as its my daily driver and its in peices as my stocker is cracked...

i have been told that the stocker will only crack due to running to lean....??? any comments?

Suggest you get in touch with Leigh from Extreme Turbo Manifolds if you need something sooner. The link is in my sig.

Found this link on power porting process of before and after hp figures done on a test mule RB30 engine when Specialised Power Porting was in its infancy.

http://autospeed.com/cms/A_0622/printArticle.html

  • 1 year later...

a bit of a update on a old topic but...... i just spoke to Abrasive Flow Engineering who does or did work for uas on hone and extrude and his exact words are for a rb25det manifold.

"""don't wast your time and money they don't flow as good as a hks manifold ""

and

"""for $900 to extrude and hone i would go and get some thing better"""

f#%$ me.this is from the guy who does them while some companies are begin for work due the the $$$$ crises this guy has shocked the sh#@ out of me so ..........after reading this post and many like it over the years and looking at the figures people have posted on flow have we all been grossly mislead by people in the industry have figures been made up for the trusting customer.

what is one to thing !!!!!!!

if anyone does reply do it here.: http://www.skylinesaustralia.com/forums/Ex...47#entry4450747

Edited by WARLORD

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...