Jump to content
SAU Community

Recommended Posts

Currently chasing a few things.

- R33 stock springs either coupe or 4dr as long as stock

- R33 glovebox

- R33 Steering wheel (must be near mint no rips or sun damage etc) and must be non- airbag s/wheel

- R33 4dr driver's door power window amplifier (R32 4dr may be same)

PM me if you have any. Cheers.

Have a set of 4 standard springs from my R33 2 door, nothing wrong with them, just no longer needed

Here is a link to them http://cgi.ebay.com....=STRK:MESELX:IT

Can contact me on 0433349400 for more info

Chasing a cheap front seat. Out of anything really as if for a track car. So R32, 33, etc whatever is cheap. PM me if you have something. Cheers

Hey mate, I have an S14 drivers seat with rail if you are keen?

WTB : Stock 1998 series 3 R33 GTR stuff.

R33 GTR standard ECU.

Front bar (preferably black).

Rear parcel shelf.

Rear driver's side inner trim.

Stock turbos (can be from a R34 GTR). Must be in working order and good condition!

Stock injectors.

Stock AFMs.

Also need coilovers for the 1998 R33 GTR. Must be in good condition and suitable for everyday driving on the street ie not too firm.

As well as an exhaust system including a cat that is not too loud and does not drone.

Looking to return a car back to stock so only really interested if I can get the lot. Don't want to end up with lots of parts that I then have to sell myself.

This will be coming out of my pocket for someone else's car! Which really f***s me off. Will need to swap over parts if you're able to help in that regard. Reacharounds for all.

Thanks guys.

r33 rb25det engine+loom and etc for det conversion.

need one as i am going to turbo my na r33 but my mate also wants to salvage parts off of it for his drift car.

pm me pricings and etc.

thanks guys :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...