Jump to content
SAU Community

Recommended Posts

hey guys,

wat is this pipe connected too and what is it for?

it was connected to the standard intercooler pipe, as shown, and the other photo shows where it is in the engine. am stuck atm with the install of the cooler,

please note that the black pipe shown by itself, is the standard cooler pipe. it has a connection point circled, and that is where the small pipe in the other pic connects to

need help

wanna finish install tonite

cheers

daniel

post-31466-1164366538.jpg

post-31466-1164366551.jpg

post-31466-1164366573.jpg

Edited by cheez
Link to comment
https://www.sau.com.au/forums/topic/144648-need-help/
Share on other sites

i just did a cooler install..

the nipple on the pipe is what runs off the boost solenoid or something ...

fact is i dont really know where it ends but i know that running your car without that vacuum hose being run back into the cooler piping your engine will run unlimited boost and basically..

BOOM

I simply went to ricol and got a nipple put into my cooler piping.. hooked it up and kicked her over..

cost me 20 bucks

ricol is in sydney / peakhurst dno where ur at

Link to comment
https://www.sau.com.au/forums/topic/144648-need-help/#findComment-2702481
Share on other sites

u cant finish install tonight unless you want to ruin your engine... if you plant it that is... just go get one of those nipples from a hardware store or something tomoro and weld it on or make a thread in the pipe.. seal it with plumbers tape and off you go...

Happy Modifying..

Link to comment
https://www.sau.com.au/forums/topic/144648-need-help/#findComment-2702484
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...