Jump to content
SAU Community

Recommended Posts

so, for a series 1 1997 rb25det stagea, a R33 same year (ie series 2) heater core will fit, as will a Z32 (300zx 1990-1996) heater core?

just confirming prior to buying one and stocking it 'till ready to do the job

thanks all.

over and out for a few weeks. off to hospy................

cyas

There are actually 2 different part #s for the stagea heater core and 2 for the Series 2 R33, prob slight difference for colder areas, eg bigger core. I would be 99% sure that they are interchangable and the Z32 would be same.

also this link:

http://cgi.ebay.com.au/NISSAN-300ZX,-Z32-N...9QQcmdZViewItem

Edited by chook

For S1 Stagea's R34/R33/R32 ones fit in. I put a secondhand R34 one in because I only paid $100 for it and I thought getting a R34 one it would be less aged. Have fun with the install off it.......................

Also did you read my points in this post above:

http://www.skylinesaustralia.com/forums/in...&st=0

hey cy,just had dash back out finialy fixed that dam creak.under it stupid spot wields on the seams,but all fixed now.also the compression is even now must of had carbon build up on that cylinder.thanks for the ride bud.

  • 8 months later...

Hi all,

Well here it goes again... I have replaced my heater core 3 times now... first 2 was second hand heatercores so understandable why i had to replace them in a matter of 2 month but then I bough a brand new one from Nissan that was about 2 years ago and the other day it decided its going to leak... What the hell i thought they are suppose to last for at least 8 years or so not 2... so help would be appreciated as to why on earth a 2 year old heatercore is leaking...

looking forward to your responses guys :)

  • 6 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...