Jump to content
SAU Community

Recommended Posts

Here is the short story:

* R33 Skyline

* Had a pod filter

* Defected :P

* EPA emissions test -> passed

* Back to EPA for exhaust retest and he checked I had the stock box back in

* EPA threatened me with a $5k fine & court apperance if I get caught again

So now what do I do??

The stock box makes the car feel a little sluggish :P

Link to comment
https://www.sau.com.au/forums/topic/14516-dilema-cold-air-stock-box-defect-epa/
Share on other sites

Guest RedLineGTR

have you changed the stock box filter, to like i better flowing one, like k&N which are common, most jap companys make panel filters as well as pods if you were after something more big brand. You could also ask the epa about getting a CAI box made up for your pod, most people are getting away with pods like that.

What about Qld does anyone know?

I have been told that they are illegal and I've also been told that they are legal, then again I've been told by my local inspection centre that they have never heard of a Pod filter.

I don't think they now what they are talking about half the time, it all depends on who you get and what they now or what they think they know

Why dont you keep the stock box in there, replace the filter with a k&n. secure the front air intake to it if you dont have one and then direct a similar cold air feed to the other side of the lid that runs to the front of the car. that should improve the throttle response a little bit and the car shouldn't feel all that sluggish with the extra colder air.

lata

I have heard that in VIC you are allowed 1 intake mod, so you can have a pod but it must NOT be made of foam and it must also NOT be an oiled type pod - so any brand fitting this description is ok in Victoria - this info was passed on by fellow members who have spoken directly with the authorities!

btw FMIC [aftermarket] and boost increase are INTAKE mods...

Secoh, its the same as 33 / 34 too in that case - the filter number is actually A360 and they are as common as muck! VN>VR commo is same too I believe, they are readily available throughout Victoria and I assume Oz too. Pulsar N14 / N15 and Pintara TRX are also the same...the list goes on...Nissan even sell them brand new!

Dremen, did you find out why the pod filter was illegal? Was it due to emissions or noise pollution or something else?

Either way, the solution is simple. Get a cold air box from somewhere like UAS or Hills Motorsports (Hills do a much better one than UAS, but costs about double) and put the pod inside that.

The reason why I ask if your defect notice was due to emissions or noise is because a pod in a box still makes a lot of noise so it still might be illegal for noise reasons.

Oh, for anyone that finds the flat filter to flow better than their pod, it was because your pod was sucking in a lot of hot air from your engine bay. I had the same problem, but I got a UAS box and it fixed the power right up again.

Guest gtst88
Originally posted by nismoR34

I have heard that in VIC you are allowed 1 intake mod, so you can have a pod but it must NOT be made of foam and it must also NOT be an oiled type pod - so any brand fitting this description is ok in Victoria - this info was passed on by fellow members who have spoken directly with the authorities!

btw FMIC [aftermarket] and boost increase are INTAKE mods...

can you confirm this nismoR34 ?

i'm in Melbourne and i plan to upgrade my intake, intercooler, cams, etc,etc

thanks buddy !

Cheers !

Guest RedLineGTR

tell this to cops and they will go..pppffff yah right and slap you for a fine for being a smart arse. The best thing to do is get it on paper of vicroads with a act number or something that they could check. Then you can tell them what ya think. Lolz :D

Originally posted by gtst88

can you confirm this nismoR34 ?  

i'm in Melbourne and i plan to upgrade my intake, intercooler, cams, etc,etc  

thanks buddy !

Cheers !

I havent spoken to the EPA directly but a couple of the Melbourne guys have and say that 1 intake mod is allowed...*goes and looks for thread* here's one: laws on mods in vic?

Or just call the EPA to get it from the horses mouth!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought it could be an issue because the standard plate was flexing when stressed. Maybe the original gear set will hold a bit better without flex? Last time on the dyno it made around 670nm at the hubs. Now it have bigger turbo and better intake but have not been on a dyno yet. The car is being used from family trips to drag race events. So the shifts can be a little violent. It is grinding if I shift to fast so was thinking I should overhaul it soon.
    • From the factory on RB26s there's a fitting on the intake manifold collector/"plenum" that provides pre-throttle boost signal. That's how they did it back in the day, I figure it's fine to replicate it.
    • I would be surprised if that wasn't the issue. It's probably telling you, that even if you remove the plastic liner, you may have some other clearance issues that may occur too in some scenarios. IE, tyre to guard. It looks like someone has already rolled the lip, but you may still have issues in the future IE, turning and hitting a bump etc. The fact it changes how bad it makes the noise when you are going backward vs forward is highly indicative that it's the tyre rubbing. They do make a terrible sound, even if you're only pushing a project car that has a liner hanging down on a tyre!   Has the car been lowered? If it has been, what is the measurement from the centre of the wheel hub to the lip of the guard straight up?
    • Summernats cruiser?
    • Mark's a bit smarter than people give him credit... He'd convince the person that is to become dead, to drive him to the forest first. That way his car has no evidence in it, and he's free to dispose of their vehicle permanently how he sees fit too...
×
×
  • Create New...