Jump to content
SAU Community

Recommended Posts

Hey guys,

Here's the jist:

R32 GTST RB20det

Appears to be overheating. Thermofan turns on and can hear it above 3000rpm sometimes....And it's happening more frequently as the weather is getting hotter.

Only use to do it sometimes.

Now does it all the time.

Anyway, I just took it for a drive to warm everything up and to test the new fuel pump. Came back home and opened the bonnet.

Touched the top radiator hose, was hot to the touch.

Touched the bottom radiator hose near the block, and it was cold to the touch.

Now this bottom hose is where the thermostat is.

Am I right in thinking that because the top one is hot, and the bottom one (where the thermostat is) is cold, that the thermostat is broken in the closed position?

Cheers,

wil..

Link to comment
https://www.sau.com.au/forums/topic/145314-help-diagnosing-dead-thermostat/
Share on other sites

Thermostate is jammed closed.

Remove it throw it into boiling water to see if it opens then replace it cause it won't open.

Oh yeah, forgot about that testing trick - my old man used to do that!

the bottom hose (cold one) is where the water goes into the motor. the top (hot) hose is where the water comes out of the head. so the top hose should be hotter than the bottom one. that is why that is where to temp sensor is. so that it reads the hottest temp the water gets to.

do you have a fmic? if you do then that won't be helping as it slows a lot of air going through the radiator.

The 32 is stock.

Hmmm...I was lead to believe that the bottom hose is where the thermostat is. It's cold, and it shouldn't be when the top one is hot.

(photo of upside down engine courtesy of mr32)

DSC00084.jpg

  • 2 weeks later...

I have the same problem but my thermostat opens in boiling water. I heard that if if doesn't open on boiling water it is definitely stuffed. But if it does open it doesn't necessarily mean it is good because it is a totally different enviroment under pressure.

Can anyone confirm if I am right or wrong in thinking this?

isn't a thermostate $20 at your local repco? just grab one and a gasket and change it :ninja:

if you really want to check the boiling water trick you need a temp gauge in it as well make sure it opens at the right temp 76o for GTR not sure if gtst is the same

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...