Jump to content
SAU Community

Recommended Posts

I ordered these wheels from the guys at JAX Tyre Centre at Southport, they are good blokes but they had a major problem getting them from the supplier, for 3 days I was stuffed around and fed BS about " Their coming from Sydney" or "They are on the truck from Brisbane", then back to "The pallet hasn't arrived from Sydney" WTF ? :ninja:

373_b.jpg

I had enough and went back to JAX and got my cash back, they had the dirts as much as me about it and they did everything they could to get me sorted out but no luck.

Can anyone suggest where I could go for wheels on the Gold Coast or up in Briz, thx

Link to comment
https://www.sau.com.au/forums/topic/145487-stuffed-around-on-wheels/
Share on other sites

which should still be stick'ed but isn't anymore

John John John...

There is a reason it is not stickied anymore... Ill explain on Sunday as to why...

In the mean time, just post your thread and leave out the narky little comments... There is reasoning in my madness...

  • 2 weeks later...

More drama,

Ordered in these from different wheel shop

octane.jpg

Thursday - " Will have them tomorrow "

Friday - " Sorry mate they are coming from S.A. come see us Tuesday

Tuesday - " Wheels don't fit on car wrong size " 32 OS need 40 OS come see us tomorrow.

FFS this is getting to be a joke, it's been three weeks now, all I want is a set of f*&%king wheels for my car !

they are dumb asses, if +32 hit the calipers, +40 won't be any better as +40 will move the wheel inwards. Brake clearance is not dependent on offset but rather the design of the spokes whether they have high disk clearance...

Yes the original wheels have are +40 but the spokes were obviously made to clear the brakes...I hope they took this into consideration otherwise we'll definately hear about it ;)

So which Tyre companies stuffed you around?? Going shopping soon so I need to know!!

Not so much the tyre shops but their wheel suppliers. The boys at both JAX and Dunlop Tyre Centre were awesome they broke their necks to get wheels for me, they just get fed bullshit from the wheel suppliers.

I finally got my rims thru the boys at Dunlop down here at Burleigh Heads, they got a shitload of rims down from Brisbane to fit against my car and came good. Good price too, glad it's all over. :laugh:

ive used Tyre Solutions at Labrador along brisbane road for a few cars of mine and hes allways come through with me and if he aint got them on the shelf hell try his best to get them for u or direct u to someone who can get them.... ask for a guy called Nima.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
×
×
  • Create New...