Jump to content
SAU Community

Recommended Posts

  • Replies 88
  • Created
  • Last Reply

Top Posters In This Topic

I don't love my stock cooler, Paul has un-natural ideas about having relations with automobiles and their parts that we don't all share.

The idea is match your flows and you get go. Mismatch the flow and you go slow. (thankyou Doctor Zeus) so don't go slow with flow cost dough crap, when you can be a flow-match-go chap.

The GTR cooler is about the right upgrade for a stock turbo if you like to hit your head with rocks and eat poisonous mushrooms, cause only then will you seem to get a quicker time.

Full boost on a stock turbo produces about 300HP worth of flow at turbo(that is a stock RB25 turbo not the dinky RB20 one). GTR cooler 450 -500HP worth of flow. Bad match. your at least 150HP out of whack air flow wise. Add the extra volume of the new piping and it's not real flash.

Mate save your money for a mod that will actually make your car go quicker. Front mounted intercooler is barking up the wrong tree at this stage.

For the record I am not against larger intercoolers I am just 'for' getting the right sized one and not pissing money up against the wall with silly mods.

No I don't have a spare granite rock to hit my head with, at least not one the right shape to make me believe you.

I believe there are already plenty of front mount advocates past and present running much slower times than me to make the point your looking for. In fact you have one of those cars :)

well the cam will be good if you match it up to an ecu remap.

It's very easy to put the cam gear on, do that yourself. Then take it in to get a remap with the cam timing setup while your at it.

Is the exhaust all the way from the turbo back?

The flywheel/clutch mod is a good one too.

Hehehehe

"And the prize for the most entertaining post in a

intercooler catagory goes to.... *rustle of envelope*...

Originally posted by rev210

I don't love my stock cooler, Paul has un-natural ideas about having relations with automobiles and their parts that we don't all share.

The idea is match your flows and you get go. Mismatch the flow and you go slow. (thankyou Doctor Zeus) so don't go slow with flow cost dough crap, when you can be a flow-match-go chap.

The GTR cooler is about the right upgrade for a stock turbo if you like to hit your head with rocks and eat poisonous mushrooms, cause only then will you seem to get a quicker time.

Good ole Dr Zeuss :)

rev210!

So if I have heard right your suggestions are to run your RB better before running it harder, alot of owners seem to talk about "boosting", but for a stock r33 is this the first thing we should be looking at? I like you idea's ie, flow matching, cam gears, ecu remaps etc.... Minor intelligent mods and not the big dumb expensive mods most go on about! Even if you have the money for the big mods you still need to think about your plan of attack as we all wont the most bang for our buck at the end of the day. Like you have pointed out there are a few other things you could spend your I/C money on first.

:)

raasclaat : Get the hybred front mount if places are not stuffing you around you should be able to get it piped and installed for 1400, you have to bargain with them, im talking 800 for the cooler dont pay more, and 600 for the install, you dont have to go to a tuning house back yarders do just as good job, usually heaps cheaper. Then add some timing and up the boost and you will be beating rev210 and this conversation will be over. some type of boost cut etc defender will be needed, there are some people that will do this to the ecu for pretty cheap.

Or you could put in cam gears, untuned. yeah that would be good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...