Jump to content
SAU Community

Recommended Posts

still stuck shut.....do i have to remove the back seats or can i drill the lock out. Aim for the midddle of the lock and drill it out ?
Call a lockswith, to open the boot (ie: break in), then get them to make the boot lock work with your key.

:P

Easiest would be to just take off the back seats and open the panel. Then flick the switch.

I've done it before on another car.

I've taken the back seats in an r33 out in 10 minutes. Removing the panel took <5 minutes. Use a short pole to flick the lever and bob's your auntie. Then you can take it to the locksmith to have the lock repaired.

Imagine if you were standing outside your car and you have the lid open.

Right in the middle of the bottom section (on the inside), there is a little plastic flap. Inside there, there's a little switch. it's piss easy to flick.

No, you don't have to get in the boot. you won't be able to anyways.

like I said, i just used a pole to flick it (not on my car, my car's perfect and nothing ever goes wrong. was on my mate's r33).

cheers

ok I am with you...............I think u have open the plastic falp first yeah...?

So use a pool perhaps a flat screwdriver on the end of the pool taped to it?

I will try this tonight....effen boot.....Must be the Valet switch. never touch anything kids unless u know what it does....except females.

  • 2 years later...

i'm in a similar situation and i got no idea what to do...

my friend slammed the boot lid with god knows what on his mind, and now i can't open it using the lever near the drivers door or the key to open it from the actual boot! the key just turns, and comes to a stop in the position where the boot should be open, but the boot doesn't open. you can hear it un-latching off something, but im not sure if thats just the spring making a noise in the keyhole or the acutal lock. if it was that little switch that tripped then they key would over ride it (i'mm 99% sure im right on that bit). but the damn thing won't open even with the key!

any suggestions??

i'm in a similar situation and i got no idea what to do...

my friend slammed the boot lid with god knows what on his mind, and now i can't open it using the lever near the drivers door or the key to open it from the actual boot! the key just turns, and comes to a stop in the position where the boot should be open, but the boot doesn't open. you can hear it un-latching off something, but im not sure if thats just the spring making a noise in the keyhole or the acutal lock. if it was that little switch that tripped then they key would over ride it (i'mm 99% sure im right on that bit). but the damn thing won't open even with the key!

any suggestions??

fixed the problem! =) .. had 2 other people help. while one held the key in the unlocked position, me and the other friend pulled from both sides and it just popped open.. but took a bit of effort! wasn't easy.. working fine now so far.. lets hope no one slams it again =s

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
    • This thing did a 1:20.88 at Winton on the weekend which is f**king rapid.  Well done mate, your driving has really gone up a few notches not much left on the table now! Good luck at WTAC.   https://www.facebook.com/share/r/1MHyZQBqZ2/  
×
×
  • Create New...