Jump to content
SAU Community

Recommended Posts

Have seen this in the flesh and it looks great! When are you starting your build thread? :)

Thanks for the kind words :) Might look into it actually just need to go back and find all my backed up pictures during the rebuild :)

R34 GTR's look tough as stock. I would just lower it slightly and chuck some spacers on, say, 20mm and you got a tough looking guy already.

Heck, buy my spacers: Quality 20Mm Spacers Cheap For Quick Sale! - Skylines Australia

Looking at getting fitting on my skirts and rear pods now so should make it look abit tougher. Would get the spacers but im eyeing out some 19 x 10.5 +12 TE37's for her very shortly :)

Nice Plates :)

Cheers :) very cheap too as they fell into the AAA - 11A category and its not classified as a full customised plate otherwise wouldnt have gotten them if they came with the hefty price tag

RTA Sold our plates to a private company so they can rape us as hard they like :/

Just finished my latest set. R34 GTT (not an R)

here are a couple of my favs from the set.

6930680713_692ebc49ff_z.jpg

6934664487_c1f65f6ecb_z.jpg

6805227342_f36b9c18f0_z.jpg

6817753344_4b7d99466b_z.jpg

Edited by MaTBoY

Just a quick snap of my car before it goes away for a few weeks after a full days detail.. Will come back with smoked side indicators and maybe some big ass brembo's

Just finished a full respray with new windshield and new headlights cause well it deserved it after what is it.. sheesh 14yrs :(

IMAG0163.jpg

Just a quick snap of my car before it goes away for a few weeks after a full days detail.. Will come back with smoked side indicators and maybe some big ass brembo's

Just finished a full respray with new windshield and new headlights cause well it deserved it after what is it.. sheesh 14yrs :(

IMAG0163.jpg

Nice. Good to see some GTT's! What fitment you running there?

Nice. Good to see some GTT's! What fitment you running there?

cant quite remember the offsets.. fronts 18x8.5+30 or 35 i think rears are 18x9.5+22 if memory serves me right sits flush with the guards front and rear but in order to run a 275 tyre on the rear I had to roll the guards because of the ride height. Only reason I cant remember is when I was buying them VisionR and I changed offsets a few times to get the right ones

cant quite remember the offsets.. fronts 18x8.5+30 or 35 i think rears are 18x9.5+22 if memory serves me right sits flush with the guards front and rear but in order to run a 275 tyre on the rear I had to roll the guards because of the ride height. Only reason I cant remember is when I was buying them VisionR and I changed offsets a few times to get the right ones

I like it, not too crazy just a nice flush look. You have any side on pics?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes the gear for the R33/34 is different, it is red and has a different number of teeth. My part didn't come with that gear though, so I don't know how many teeth are on the red one. You'd have to reuse the 260RS/R33 gear, as long as it's not destroyed.   Haha, as unfortunate as that might be it was working fine for about the first 1500km I've had the car for now.
    • Update all   thanks to the workshop manual, it lead me back to checking fuses as mentioned central locking and door open lights worked when acc was switched on. diagram attached shows two points of power 1. ACC and 2.  Batt with the later being fused (#28) I did check the fuses using a multimeter but I must have stuffed that up also. Went back and checked the batt fuse in interior fuse box and you wouldn’t believe it… a blown fuse. replaced fuse and everything is now working as it should including the climate control   thank you all with your positive insight and knowledge.    
    • Where is the warning "That this thread is super old"   I just went into a 5 year old thread, went to do a reply, and couldn't see anywhere obvious a warning of it being super old
    • Duncan is correct. Pitwork (and Toyota's own cheap brand "Drive Joy") were primarily created as brands to sell other manufacturers car parts. It would be weird if Nissan sold parts for Toyota vehicles with a Nissan logo on it, so they created Pitwork to sell parts for other brans Toyota, Honda etc. They are not the same as Nissan genuine parts, although they *do* meet Nissan's standards for replacement parts. They aren't supposed to be a substitute for genuine parts, but a cheaper alternative that is better than Ebay fake parts from you-know-where.
    • Thanks GTSBoy, much easier to work with it now it's free!  
×
×
  • Create New...