Jump to content
SAU Community

Recommended Posts

I have just one thing to say. Fag christmas lights, they suck down some power!!! If we have power shortages its because of those barstards, and its going to mean my aircon wont be working either, and I'll get hot! That and we have one house down the road, they have just gone spastic with lights, but with no sense of design or order. Just more lights the better! I come round the corner and Im nearly blinded!

(for those who take life far too seriously, especially their internet life, this is mearly a bit of a joke, christmas lights are good when well done, with some thought put in to the set up, however the above example is too true these days, and we have one down our street and it annoys me)

lights cruise says fender bender to me

i hate having to stickybeak while driving

(edit: actually that sounds bitchy, even though mushy knows me

i should say instead that this soudns like a really nice thing to do, but i'd be too scared of hitting someone)

well i just want some locations so others can go there and for the families they get to take the kids out and have a look as well. If a cruise happens later on so be it but lets start with some locations

sorry was a bit harsh, i drove through bracken ridge the other day and noticed a few houses had gone all out, dont know streets buit was atleast one per street.

Also here at newport, it seems not many people do they front yards, abut alot of them decorate there pontoons/jettys and bacl fences for all to see.. Looks kinda nice at night with the lights reflecting of the water.

AND i noticed last year that northlakes was like a christmans tree, almsot everyone does it

p.s im not gay

Not sure of the street but if you turn left after the B.P. on Old Northern Rd Albany creek there is a couple of good houses there.

There is a house and a church on Appleby Rd Stafford heights near the Bi-lo.

Church on Muandrell tce at West Chermside.

Edited by subzeroR33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
    • And yes with a full tank it will hit limiter free revving or driving 6B6CDF6E-4094-426D-A9CB-6C553475FE36.mp4
×
×
  • Create New...