Jump to content
SAU Community

Recommended Posts

do a search

its covered a million times why no bov causes stalling

Someones a bit short... a million times hey?....

My manual 33 is doing the same thing this week, pull up at the lights, clutch in, and the revs drop right down, they come back up a bit but idle is a lot lower than it normally is.

Edited by travb81

try new plugs in. when i first got my 33 it was stock (except for the front pipe). when i backed off after a quick squirt it would bog down, and if i did it then put the clutch in and idled to a stop it would stall. i put new plugs in and it solved the problem.

There are a few reasons.

Firstly..nissans rely on a plub back BOV. The stock ECU is mapped to it...it expects that extra poofteenth of air on idle return. It's a tempremental issue dependant on things like the state of your AFM, TPS and AAC valve. Some guys can get away with it..some guys wont. Some guys will tell you that it runs ok but it really doesnt and they just love the futters.

If you insist on running VL style with no BOV then clean your AAC and AFM . If it still happens then you can "tune" it out with a SAFC or PFC.

Please use the search button now for any more questions re: the above

Someones a bit short... a million times hey?....

My manual 33 is doing the same thing this week, pull up at the lights, clutch in, and the revs drop right down, they come back up a bit but idle is a lot lower than it normally is.

Not really, it has been covered many times in the past

Im not going to type up another post about why as i've done so many times already.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Alright. Exhaust has been looked at, and booked in 'soon'. I'm not 100% convinced it's going to be as good as possible but I'm going to go with it anyway. If I get a reasonable thing that works for 10 years I mean that's twice as long as I've lived with the current one. I have a more pressing issue. I have fixed my MPVI3 (by buying a new one). Excellently, one can wire in analog 0-5v inputs to the ECU itself. I had wideband already via Serial so I also wired it in via the direct input. The idea being I can use the standalone logging without a laptop and have Wideband data in it. The other wire I thought I'd use oil temp. This is where I've gone crazy. HPTuners requires you to implement a formula so you know how much volts = how much temp. This seems relatively simple to me. However I cannot find the scale for this anywhere on the internet, nor decipher how to figure it out without removing the sensor from the car. All I know is that voltage actually goes up as temperature goes down. I am using the actual gauge, so I can see what the temp is. The signal wire has been branched off into the MPVI3. EXAMPLE: 2.68v = 58C 2.7 = 57C 2.74v = 56C 2.8V = 54C 3.06V = 49C 3.18V = 47C 3.37V = 43C I think the gauge is 50-150C. It may be more. It may be less, because I can't find it for the love of f**k. It appears all the information about the gauges I have has been scoured from the internet, but the sender is VDO 320.021 I believe the resistance chart is this How the f**k do I convert this to a voltage? Once I have a voltage... I then have to perform this transform of said voltage to show it in the scanner: https://www.hptuners.com/help/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm @GTSBoy you're probably my only hope here TEST YOUR MIGHT    
    • Here’s the updated and installed muse replica nismo ones … very happy with the outcome. Eventhough I painted my whole rear end due to my rich idle lol. 
    • Hmm. I had a good look (w/o searching, because I'm not logging in) and couldn't see it either. I distinctly recall the thread, not many weeks ago. It must have been removed or perhaps put into the back section. If it was in Off Topic you should at least have been able to search it up. So if I'm not hallucinating, it is fairly decently removed.
    • I had my car model wrong on my Shannons insurance when i had my V36. didn't make a difference when i claimed a windscreen. Nightcrawler is a negative nancey 🤪
×
×
  • Create New...