Jump to content
SAU Community

Recommended Posts

Hokay , many arguments over this but how can I positively identify the 480 or whatever cc side feed injectors . There must be a colour and part number on them so can anyone state 100% what it is . Everyone seems to agree that JDM manual S15 turbo's have them .

Cheers A .

Edited by discopotato03
Link to comment
https://www.sau.com.au/forums/topic/146846-s15-sr20det-injector-details-please/
Share on other sites

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...

I've just bought a set and they are no where near the red shown above.

More a shitty light brown

Is that the 'Teracotta' colour?

(definatley not the pruple ones, seen them before)

I assumed they would be red but now with the 'terracotta' talk, are we saying there are 2 different coloured injectors for the same type?

I'm hoping it's a yes as I'm a tad worried i wasted cash on these 4.

Also, i have a set of 4 brand new ones coming over from Japan. (with a GTR R33 pump...yippee!)

I'll flow test these brown ones and give my results

Also, I'll give a quick photo of both colours side by side.

Oh yeah, I'll also have 2 spare left over for anyone hunting down a set of 4 and need the extra 2 :)

  • 2 weeks later...

Well, i got em today.

4 brand spankin' new s15 injectors with all rings included.

I also have 4 used as well.

I don't know why but every photo I've seen (including the ones I've taken) look redder than what they are. Go figure??

Here's a comparison of new to old, easy to tell which is which although the old look pretty good too.

..and some pics of the extra parts you need if buying new.

post-5823-1167709124.jpg

post-5823-1167709162.jpg

post-5823-1167709201.jpg

post-5823-1167709238.jpg

post-5823-1167709341.jpg

post-5823-1167709375.jpg

Edited by Birnie

If someone could elaborate on this it could be useful.

Don't know where it was sourced from but considering all the theories on what these flow, it may help.

Looks like standard fuel pressure is 450cc and up to 525cc's under the right pressure? (not sure if I'm reading it correctly)

http://www.williams.co.tt/s15/inj_side-en.htm

Well, i got em today.

4 brand spankin' new s15 injectors with all rings included.

I also have 4 used as well.

I don't know why but every photo I've seen (including the ones I've taken) look redder than what they are. Go figure??

Here's a comparison of new to old, easy to tell which is which although the old look pretty good too.

..and some pics of the extra parts you need if buying new.

Ok I gived up searching . Are the seals used on RB25DET (R33) the same as SR20DE/T ?

I gather the O rings are upper and lower on the injectors themselves and the thicker square section seals fit on/in the manifold and the rail locates inside them . What about the other little gadgets - caps of some sort .

Would be good if Nissan (or someone) did a kit of seals to R/R RB25 injectors and if so part number .

I suppose Brighton Nissan spares would be the place to look in Southern Sydney .

Cheers A .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...