Jump to content
SAU Community

Recommended Posts

Hi Guys im in need of some help here...

My stagea has developed a shudder through the steering wheel under heavy load when launching o. It doesnt always happen, and only happens in first or 2nd gear (standard auto still).

I have noticed its more likely to happen when i have the wheel turned, say powering out of a round-a-bout.

The shudder will continue through first and second gear, if i back off and then accellerate again it dissapears.

You can really feel it through the steering wheel, it gets a really strong vibration or shudder.

I thought it might have something to do with the front drive shaft or something, but not having a clue about the attessa system or 4wd for that matter, I dont know where to start.

Has anyone else had this problem or any ideas on whats causing it?

Cheers,

Ben.

Link to comment
https://www.sau.com.au/forums/topic/147404-heavy-vibrations-help-me-please/
Share on other sites

Yep, I would look att the CV joints in the front drive shafts too, If it was the front drive shaft, like mine was, it wouldn't go away after backing off, or in any higher gear.

read somewhere in another post that when the solders on the AFM becomes dry and cracks...when travelling on uneven roads the connections can move about slightly causing the car to jerk or shudder...then when on a flat road the revs become stable again...might be a faulty AFM which from what i hear is very common...doubt its the cv joint because when this wears out...the shudder or noise is quite consistent and doesnt go away. Dont know how a broken atessa feels ..maybe someone who's had this experience can share more.

my car has developed this cough when idling...happens especially when hot but the car revs smoothly when driving....really buggin the shit outta me...changed and gapped plugs to 0.813mm ..so definately not that

trying to go through the process of elimination too..so next week im gonna hafta clean the AAC and solder my AFM

anyone who's had this before would really appreciate some help.

yeah its defenantly not afm.

Its in the drive for sure, just not sure where yet! im gonna sneak it into the workshop and try have a good look underneath with the hoist and see if anything is visable.

I hate it when my car isnt 110%!!!!

yeah its defenantly not afm.

Its in the drive for sure, just not sure where yet! im gonna sneak it into the workshop and try have a good look underneath with the hoist and see if anything is visable.

I hate it when my car isnt 110%!!!!

Come to think of it...my car used to do that ...always in 1st or 2nd and when under load..eg uphill ascent...always thought it was uneven road...but apparently was caused by a faulty coil ...hardly noticeable but gradually reared its ugly head...solved now with some high temp silicone.

even if ur coils arnt shot...might be worth doing ...look in the DIY threads.

  • 8 months later...

Hi peeps - I know this is an old thread and has been covered a few times but I'm concerned as my Stagea has developed exactly this vibration issue. I'm in the UK and the cars are a rarity over here so I'm trying to research this as much as possible before taking it in next week to get sorted. I've had the wheels balanced but it has not improved. I had the wheel alignment checked at the same time and they said that they set all 4 wheels parallel as per most other 4WD vehicles - but I have noticed some feathering on the front tyres since then. Was it wrong to get them aligned like that? It is in next week having a load of work done so I want them to try and sort this too. All 4 tyres are toyo proxes but the fronts are slightly less worn than the rears, could this be an issue? I've got a set of Tein SuperWagon Coilovers going on so they can have a good look around then - and I guess the suspension swap might even remove the problem anyway. Any suggestions would be really appreciated - I'll try to glean as much as I can from the other threads - but I'm not really technically minded so any 'plain english' (or plain ozzie) explainations would be great. Cheers peeps. :rofl:

Ps - I'm also having a Blitz down pipe, a GReedy Front mount fitted and the Turbo is being re-built with GT30 internals - looking forward to getting it back after!

John

I had the exact same problem all the time, for about 4 months. My front tyres were worn. I replaced them with new ones, and have not had a repeat in six months. I consider the issue fixed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah nice idea, you mean to suction it to the gauges? I hadn't thought of that.
    • A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • Tow a boat... people won't know wtf is going on 🤣 
    • I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
×
×
  • Create New...