Jump to content
SAU Community

Serious Help Needed

Shoudi

By Shoudi,
in Engines & Forced Induction

 Share

Recommended Posts

Shoudi Enthusiast

Shoudi

Posted
Posted

Hi Guys

I have an R33 GTST and it is haven some major problems lately.I Installed the Apexi Power FC Last night and I want to take it to get dynoed and tuned but the car is running like shit. It will hunt around every now and then, It surges really bad, it feels like the engine dies and when you accelerate only the turbo opens up and the engine makes a dull machine gun sound and jerks really bad. The RPMS also drop while you accelerate and then the engine kicks back in or sometimes it will drop way down until it stalls itself. For some reason it happens on and off and I'm starting to get worried as the episodes last a minute or two and at the moment it's to hard to drive and it will happen on straights or corners just out of the blue. I was thinking it needs a new fuel pump or it's not getting enough fuel. The car will also only half accelerate, you accelerate but it's like it will hold back.I have also tried resetting the ECU and doing the Idle test. I'm running out of ideas and these episodes started last week before the ECU was put in. What is is? Please help I want my baby to run again

3" cat-back kakikomoto exhaust

Splitfire Di Ignition Coils

Hybrid Intercooler

HKS Pod Filter

Blitz Boost Gauge and Full Turbo timer

Apexi Power FC + HC

Link to comment
https://www.sau.com.au/forums/topic/147420-serious-help-needed/
Share on other sites
Shoudi Enthusiast

Shoudi

Posted
  • Author
Posted
sounds like dieing fuel pump to me.

What pump should I use. Is the Bosch 044 any good? I've read alot of highly modified cars use them. Also how amny is to many or not enough? I've seen some with 2 or 3. Any ideas would be greatly appreciated.

Nabil Rising Star

Nabil

Posted
Posted
What pump should I use. Is the Bosch 044 any good? I've read alot of highly modified cars use them. Also how amny is to many or not enough? I've seen some with 2 or 3. Any ideas would be greatly appreciated.

With your current modifications

stick to a 040 in-tank it will support 500hp and costs about $190.

An 044 is external and will cost more to connect.

PS. Before you fire up the engine can you hear

the pump priming?

Shoudi Enthusiast

Shoudi

Posted
  • Author
Posted (edited)
With your current modifications

stick to a 040 in-tank it will support 500hp and costs about $190.

An 044 is external and will cost more to connect.

PS. Before you fire up the engine can you hear

the pump priming?

Yeah you can for a second or two sometimes

Edited by Shoudi
WazR32GTSt Grand Master

WazR32GTSt

Posted
Posted

my reasoning is...

car works fine

something is changed

car runs like shit

...therefore, the reason the car runs like shit is directly related to what you changed

have you tried putting the stock ECU back in to see how it runs?

my bet is the powerFC not connected properly..

good luck

Warren.

maccattack Proficient

maccattack

Posted
Posted

I had an intermittant problem similar a while ago. Car would stall (almost), then run fine, then be shit again for no reason. Changed everything from AFM's to pump to CAS to wiring etc. Turned out to be the connection on the top of the PFC. Because of the centre bolt, the outer pins would lose contact as the plug rocked back and forward. Put large zip ties around the ends of the PFC and plug. See if it helps.

Shoudi Enthusiast

Shoudi

Posted
  • Author
Posted

It was acting like this exactly 4 days before installing the PFC. I wnet through the half hour idle set up and only a little bit of black smoke comes out but when it plays up a shit load does. It had same problems a week ago with the stock ECU.

Scooby Veteran

Scooby

Posted
Posted
these episodes started last week before the ECU was put in.

so I assume it's prob not the pfc entirely, although the symptoms may have changed a little due to the pfc settings. it sounds like an AFM to me but I don't know what the machine gun sounds are from. if it was making them only after the pfc it might be the ignition settings. either way just go back to the stock ecu and start diagnosis from there at least you have a known start point. use the self diagnostics to see if it's a sensor fault.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      New fix for low tyre pressure from bmw

      By MBS206 · Posted

      H1 is not the Humvee, but is the most road based version. Lachlan (HankScorpio) on here has a proper Humvee. He imported it a few years back.
    • PranK
      New Stegea Owner

      By PranK · Posted

      Welcome Thomas! Sounds like you've made some progress. Are you able to drive it and enjoy it a bit now ? 
    • The Bogan
      New fix for low tyre pressure from bmw

      By The Bogan · Posted

      HUMVEE are fine in big open areas, but they are problematic on the street and tight areas As for reliability, some of the  US Army guys I have chatted with have said that when they were working they were fine, but, the do spend alot of time in workshops for multiple reasons, admittedly, they did get a hard time by the boys and girls who drove them I would definitely put them in the "buyer beware" category  They do look tough as nails though 
    • GTSBoy
      R34 gtt rb25det neo timing belt kit

      By GTSBoy · Posted

      Just don't use ChatGPT or any other artificial stupidity for the equivalent of googling. Their demonstrated inability to discriminate reality from hallucination should be enough to make them totally untrusted. LLMs don't know anything and cannot think to even the smallest extent. They are just predictors of the next word, and that should never be confused with capability.
    • GTSBoy
      Another little story of weird shit happening

      By GTSBoy · Posted

      I think, given the usage model described in the OP, I'd never ever experience the wonders of the 400kW upgrade. What I really need is boost from 2000rpm and probably no more than 260-270rwkW. But I suspect that the highflow is not actually the turbo for that purpose, so I may in fact need to get a G25 or 30 or something right sized and very spooly. We shall see after it is tuned. I've had to back the boost and boost ramp off to stop the thing from pinging since the highflow went on, so I've been almost living the NA life for 9 months now! Injectors are recently in hand. AFM is in hand. Dyno is fixed. Just need to clear a queue of f**king Supras out of the way (and probably fit my new gearbox). So....some time this year? Lol.
×
×
  • Create New...