Jump to content
SAU Community

Recommended Posts

I don't know the best thread to post this in...

Has anyone had experience with G-Tech Performance Meters?

They plug into your cigarette lighter, and measures acceleration accurately to tell you things like:

0-100 times

g-forces

and horsepower

Wondering how well they work, and if anyone has one? The idea of being able to measure power without going to the dyno may be handy for making adjustments on my car, and being able to gauge the changes better.

Link to comment
https://www.sau.com.au/forums/topic/148301-g-tech-performance-meter/
Share on other sites

  • 2 weeks later...

I've seen one of the original G-Techs used.

The guy ran a 101rwkW in his CA18DET S13 at Unigroup's dyno, and then when he was going home it measured 99rwkW on one of his street "power runs". So, pretty damned accurate.

ive got a g tech and cant say that ive used the rear wheel hp function yet but when i used the quarter mile function with my old turbo set up i got 111.5 mph on the gtech and 110.5 to 112 mph terminal speeds from the print outs at calder park race way. i used the 0 to 60mph on the street as a guage to how well my car was responding to modifications. so i think that it is an amazing piece of gear!!!!

I used one the other day.I got 5.9 sec to 100km.And a g-force number of 0.57.Not bad for a stockish R33.

On the other hand my mate who owns the G-tech pulled a 5 sec to 100km and a 0.72 on the g-force metre.

But he has a club spec5 wrx with alot more mods.

I am the national importer/distributor for Beltronics, and I have a version called the FX2 Accelerometer...

All of these devices (Beltronics, G-Tech, Pivot, etc) are similar but the difference is in how many times a second the unit measures the G-forces, and how many parameters you can input about the car (weight, drag, roll effect, etc)...

I have used the FX2 in my car and it is registering a average time of 12.7, and although I haven't taken it to the drags yet, I am sure it would post a very similar time (probably a little better with a burn out and race prepaired track).

I think that they are a great way to see if a gain has been made when you change something or upgrade a modification. There is an extra cable you can buy to link it to your computer and with the free downloaded software, you can view upto 10runs with break downs of 60', 120', and 1/4mile with 0-100 and ET... it also shows the HP based on the inputed parameters-Vs-the G-forces. You can clearly see where you make the gear changes and you can also look at the power curve to try and make it as smooth as possible with tuning.

Very neat piece of gear... PM me if you are interested and I can direct you the local dealer or I can arrange something direct.

click here to view the FX2

I am the national importer/distributor for Beltronics, and I have a version called the FX2 Accelerometer...

All of these devices (Beltronics, G-Tech, Pivot, etc) are similar but the difference is in how many times a second the unit measures the G-forces, and how many parameters you can input about the car (weight, drag, roll effect, etc)...

click here to view the FX2

Interesting but the link provides no information about the product?

I have used the G-Tech Competition one, it also allows you to download the run and look at different points on the screen. It even prints out a dyno run page!

It was only a few kw's off my actually dyno pull.

If you take the time to set it up properly with acurate weight etc it's great!

Cheers

Josh

how much are these now.. seen them on ebay a few years ago for like 60..?

still get them off ebay?

I got mine for about $60 a few months ago, and they are still available at about that price. The newer G-Tech Pro SS, which measures heaps more stuff (and looks sooo much cooler :laugh:) goes for about $320 (http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=300066211531)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • Should have asked what is the car?
    • I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
×
×
  • Create New...