Jump to content
SAU Community

Recommended Posts

  • Replies 6k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Looking at some of those bull’s eyes it may indicate you need a bit of bodywork or at least a high fill primer.

Did you say you are doing it all by hand?

It can be hard not to get rub marks in the car if you are doing it all by hand, can you at least get a block, or better still an oscillating orbital sander (air tool) to do the majority of the work. You will need to finish it off by hand, but to do the whole lot by hand is a big job.

PS any little imperfection will look 10 times worse with a coat of paint on it. Before you paint it get someone with a good eye to go over it and highlight the bits that need more work.

The first time I painted a car my preparation wasn’t good enough (after a week of work) and the car looked almost as bad with the new coat of paint on it.

hey guy,

thanks for the advice. yeah the bull's eye are obviously dents in the fenders. im using a block and all by hand. Its a big job but i dont have the necessary orbitor equipment so im just going to have to do without it. Im ust concentrating on the sanding atm and then will fill up the dents prior to applying the primer. I aint rushing it so should hopefully be ok.

Looking at some of those bull’s eyes it may indicate you need a bit of bodywork or at least a high fill primer.

Did you say you are doing it all by hand?

It can be hard not to get rub marks in the car if you are doing it all by hand, can you at least get a block, or better still an oscillating orbital sander (air tool) to do the majority of the work. You will need to finish it off by hand, but to do the whole lot by hand is a big job.

PS any little imperfection will look 10 times worse with a coat of paint on it. Before you paint it get someone with a good eye to go over it and highlight the bits that need more work.

The first time I painted a car my preparation wasn’t good enough (after a week of work) and the car looked almost as bad with the new coat of paint on it.

:werd:

Heya Sleeper, do you have some spare time in the next month to come down to morepower and get my turbo high flowed? Would be good to show them that I want the same service you recieved for the same price etc.

no problem. :Pimp2:

I have a week of from the 9th to the 17th :uh-huh:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...