Jump to content
SAU Community

Recommended Posts

I've picked my self up a VG30DET BB turbo with plans to get it highflowed by gcg later on down the track. Anything over 250rwkw I'd be happy with. :(

 

For now I will be bolting it on with an adj. FPR (maybe injectors depends on $$) to see what she gets.

I'm expecting around 210rwkw peak some where around 5500rpm. ;)

 

Unfortunately I can't spend money on the highflow at the moment as I need to get the suspension and diff sorted.

The subframe bushes are nackered as is the diff, it now some times breaks out in to a single spinner when jumping on the gas in second, if it doesn't do that it breaks out in to a nasty axle tramp due to the stuffed subframe bushes. :(

Hey Cubes, below is a link to BT Revolution, they sell bushes made be Zenith Tuning. Zenith is my Brother in laws new business, making up bushes, strut braces, boot braces and guard bracing, all of which is made local, sold locally at Exhaust Technology, D1 Garage and Viva, or i guess PM me.

  • Replies 6k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Get them to make a strut brace that steps behind the motor similar to a VL Commodore one. :rofl:

I can then bolt it on the RB30DET. :P

Where's the link?

Sorry fella here tis,

http://www.skylinesaustralia.com/forums/sh...ighlight=zenith

You would have to ask him about making a special one for your RB30!!

do you know how much one is looking at to get a stock Skyline turbo high-flowed Joel?

My Neo turbo also has the plastic impeller - I wonder what the cost would be to change it to a steel one?

I believe steel wheels are part of the GCG highflow process.

You only want to take your turbo off once right Andrew...

thanks max for not telling me you were not coming

thanks for not having your mobile on

thanks for wasting my time (its at least 20 mins for me to get there)

its cool not to be able to make it, all you have to do is tell me, so i dont waste my time

*end rant

hey sam. Aint you lucky. Well i wont have access to the net for a while so no post whoring for me =D - im typing this from my gf's laptop. Anyways, im more than likely going to go ahead with the respray this weekend as i have the equipment all ready to be hired. Want to give me a hand? oh btw Is 17cfm rated air compressor sufficent for spray painting sam?

pete - mate any chance i can borrow that spray gun of you? or if anyone else have one i can borrow that would be much appreciated.

cheers,

dooky.

Thats not good to hear mate, hope you get better. Im suprised you able are to even sit at the computer. =D

With the car, Im going to hire the equipment - air compressor and jetfire heater. Good thing bout the place im getting it from is that sunday is free which hopefully is sufficient time to prime, sand and paint. Only thing i cant get atm is a decent spray gun which hopefully can be sourced by friday.

picked up my R34 today :rofl: - still going to be a while until it is on the road .... still haven't found a stock R34 exhaust - THERE HAS TO BE ONE SOMEWHERE IN AUSTRALIA!!!!!! /FRUSTRATED

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...