Jump to content
SAU Community

Recommended Posts

  • Replies 6k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

WOW - got my bush bearing high flow turbo today - Sliding Performance RB25 rated at 250rwkw at 1bar.

Im hoping for around 200awkw at 1bar once dynotuned at Graham West autos on the 4wd dyno, the safc and sitc will need a fair tweek I reckon. But I'll tell 'em you got 3hrs to do the job :happy: hehehe dont want to spend too much.

But putting it on the Stagea on Monday - cant wait !!! so excited ! :sorcerer:

hopefully it all works out smoothly, a backyarder install job so it'll be fun.

Im a bit limited atm tho to kneeling and all that, yet.

Plus I dont know when I'll be able to get it tuned. So I'll keep it to 10psi for now. :P

anyways, happy days

Brendan, all the best with the turbo install.

Actually I was just today wondering why the guy that tuned my car only left the boost at 11psi?! He reckoned if he put the boost any higher it'd hit boost cut - is that true? I thought there was no boost/fuel cut or anything - its just if the ecu detects too much airflow it will hit R&R??

Made me wonder if I took it to a different tuner would they be able to get more power out of it....hmmm.

yeah itd hit R&R (not boost cut) - but thats what your safc is for. plsu maybe a z32 afm sometime down the track. with a front mount and a tune at 1bar youd see good results.

isn't the stock r34 cooler meant to be good for 200awkw or close to? sure it wouldn't be at max efficiency at this level but I'm thinking I'd just get the power first and worry about that later - as long as its cool enough. One step at a time :P

I want to boost it to 14-15psi eventually (like u said ~1bar). THEN it can stay like that (think i've said that before lol).

Also the z32 would only be necessary once the stock afm is maxxed out - correct? still a little way off yet. I reckon I could squeeze another 10-15awkw out of it just by upping the boost and re-tuning...what ya reckon?

I'm getting 13L/100km city driving to/from work with aircon on half the time which I think is fantastic. I've seen 12.5L/100 and that included about 10% with aircon on...so I reckon there's still more leeway for more boost yeah?

Also, not sure why but my stock boost solenoid is still connected up to the intake piping as per before (not connected to wastegate tho - only the manual boost controller connects to that - and it appears to be done properly). Not sure if this would affect my boost level somehow - could be why its dropping off to 9psi?? Most people had good results with the needle valve boost controllers holding boost...but not me. If it held 11psi all the way I'd pick up 10awkw just there...

sounds great !

my thoughts are, with the safc, if you are going to retune it for more power; a) either tune for more power say at 13psi and pick up that 10+awkw, perhaps using a good EBC, or b) tune it once so supply the good EBC, a good FMIC and a Z32 afm and do it all at one, hell maybe even a bosch 040 fuel pump.

just that with the safc, if you add a fmic on right now your tune gets a bit outa whack - I noticed this with an aibox mod and also with the fmic install I did. ebay and it was cheap. ;) with the safc if you add bits and pieces here and there it puts the tune outa whack, etc.

she'll be right, all in good time hey. :P

sounds great !

my thoughts are, with the safc, if you are going to retune it for more power; a) either tune for more power say at 13psi and pick up that 10+awkw, perhaps using a good EBC, or b) tune it once so supply the good EBC, a good FMIC and a Z32 afm and do it all at one, hell maybe even a bosch 040 fuel pump.

just that with the safc, if you add a fmic on right now your tune gets a bit outa whack - I noticed this with an aibox mod and also with the fmic install I did. ebay and it was cheap. :P with the safc if you add bits and pieces here and there it puts the tune outa whack, etc.

she'll be right, all in good time hey. :(

yeah i was thinking about that too - even if I just want to wind the boost up a bit - it'd need a retune to work properly.

Not worth the $$ for a retune just for 10kw gain in my opinion. so i decided its better to wait until the next "upgrade" stage and do multiple things at once. better value for money that way...

still, no rush. Have been over the moon about the performance of the stag since my last tune. :P

that is, except for when the weather is hot, and the aircon must go on - turns the car into a slug, needing much higher revs than normal to get it to move :/

nothing better than taking the car out for a thrash on a cold night...makes it really go! :)

A little way to get around the R&R is to bump up fuel pressure and pull a heap of airflow out of it. The only issue with this that the ecu essentially runs on a lesser load point that runs more ignition timing. This will gain you a little more power before you hit r&r but after that you really need to drop an ITC on it.

OR... See Apexi are canning the Powerfc and have a type of piggy back full ecu replacement.. so still use the stock ecu but runs as a emanage type piggy back setup. It appears to look the goods and hopefully as they are canning the pfc it will be just as good as a full ecu.

A little way to get around the R&R is to bump up fuel pressure and pull a heap of airflow out of it. The only issue with this that the ecu essentially runs on a lesser load point that runs more ignition timing. This will gain you a little more power before you hit r&r but after that you really need to drop an ITC on it.

OR... See Apexi are canning the Powerfc and have a type of piggy back full ecu replacement.. so still use the stock ecu but runs as a emanage type piggy back setup. It appears to look the goods and hopefully as they are canning the pfc it will be just as good as a full ecu.

sounds great!

will look into it for sure :huh:

there is a nude male wrestling seen in which there is various sex position action which is highly disturbing. other than that borat is worth the money. he preys on americans total ignorance and stupidity and even made money off the people in skit. they are all real as they are skits. truly ingenious.

Cubes - any suggestion on how to (calmly) :) put the top turbo water feed banjo hard up against the turbo and feed the bolt in? Due to using the washers its just too much of a handful........

The top water feed?

You mean the side water feed/return? The top feed should be oil.

The side water feed/return closest to the block can be a pain in the arse as the inside washer falls down easily. I have in the past used a little petroleum jelly to hold it in place while I get the thread to take as it can some times be slightly off and quite stress full. :)

yeah, cheers mate. My thoughts late last night were to stick the washer down first with something, say oil or grease or gasket goop etc, and then get that thread to take.

oh well, back to finish off the job

ta mate.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...