Jump to content
SAU Community

Recommended Posts

Hello everyone!

As much as I do love my $100 turbosmart Bleed Valve I know that in every mans life there comes a time to upgrade to an Electronic boost Controller, what advantages do these have over the bleed valve other than the spikings sometimes in the bleed valves? is it worth the extra hundreds of $$$$ is lag lessened that much?

What brand are good and do the cheap Trust Profec B do the job?

If any of youguys know of someone who is selling a electronic Boost controller in the near future for a cheap price let me know...

I was looking at the Trust Profec B something minimal as far as electronic boost controllers go but effectove i hear and only about $400....

Link to comment
https://www.sau.com.au/forums/topic/14874-electronic-boost-controller/
Share on other sites

the profec b's are fine. they do have the function GAIN or fuzzy logic or whatever trust call it which is supposed to reduce lag. basically it holds the wastegate shut until the desired boost pressure is reached rather than 'bleeding' off the air. it depends from turbo to turbo how much an EBC reduces lag, but dont expect miracles

the biggest advantage is now youve got an electronically controlled solenoid which you can adjust from inside the cabin depending on driving conditions or how hard you want to drive. so you dont have to hammer the car all the time. this is the biggest advantage i found from the 'upgrade'.

Originally posted by GTS-t VSPEC

I have a Blitz SBC, and while it is great if I had known that my engine management would allow me to control boost then I'd have saved my money.

See'ya:burnout:

Then will you be sellling it? Also whats the hybrid one from Hikari like?

I do like the Profec B nice and cheap and has 2 levels of boost setting to choose from... this will be nice in the wet weather of winter!

How can he be a guinea pig if no one is using it and everyone is recommending blitz....

it is $320 from Hikari

Someone in WA is using one with nothing but praise. I cant remember who though... is a little cheaper than the blitz, but I have also only heard good things about all blitz stuff

search search search dood, i swear there is a good thread about these EBC's

Guest RedLineGTR

Check this tread out, some comparisions of boost controller, thoe not on a skyline, still some good info and comparsions on holding boost, i assume it will do the same on a skyline.

Hope it helps somewhat. Cheerz ROb

http://www.skylinesaustralia.com/forums/sh...&threadid=13873

i recommend the HKS EBC.

I use to have problems with it when it first came from japan with it spiking and whatnot, but i pulled the pipes off and gave it a quick clean and now its working. And does so quite nicely too. :-)

Shaun

if u get the hybrid i will kill u  

never heard of it and no one seems to use it  

u wanna be the giunea pig  

plently of people use these units...?!?! works auto sell them, simon uses one in his R32.

nothing wrong with single solenoid, the majority of budget-priced EBC's use a single solenoid.

I use Hybrid on my car, Works uses it on his car, don't diss what you haven't tried

As a comparison to my old turbosmart bleed valve, this unit is AWESOME ... after paying approx 340 for it, I came to the conclusion that it would be useless paying anymore for an ebc, since this unit jumps to boost, and holds it there tight

And was piss to install too :D

It is only restricted to 20psi if you use the 2BAR MAP sensor, however you can upgrade them and run higher boost ... but noone here is running more than 20 anyway :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG is has not responded to my emails so far after purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...