Jump to content
SAU Community

Recommended Posts

um no i dont have one really that i could lend you but you can just go buy one make sure it has a warranty then if you swap it over and the prob is still there just take it back and say its faulty.im not 100% sure if they can be electroncally tested maybe someone on here knows.but yeah good suggestion is to advance it first and see how you go.

thanks for the info, i think i will try a differnet cas and see if that fixes anything. its worth a try i guess.

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

just a quick question, is it that the car is just plain slow, or is it a start/stop/start/stop type of thing?

No its a start then stop thing. The tubo spools as normal but car serverley hisitates, almost undrivable, cant really take it over 2.5-3k

I dropped it into F.I.S.T. performance as they are local and one of the few workshops open today and the only works shop who would take the car with such little notice.

So fingers crossed i get it sorted and i will report back as to what the problem is.

I have found other posts with similar issues to what i experience but when they get it fixed no body reports how they fixed it :(

Hey guys! got it back from FIST performace, guys there where great very knowledgable.

Okay when it came in on the dyno it made 128rwhp.

List of things fixed.

- I had a busted fuel pressure regulator

- MY airflow meter was no good!! i tried 2 sensors previously and also resoldered one but that didnt solve it.

- Timming, The cas seems to be in a very advanced position, Tuner said for some reason this car needed a lot of timing to do anything. I know the car has had a rebuild from previous owner with pistons but thats all i know.

- boost 11psi

When it was sorted on the dyno it ran 270.9 RWHP or 202.1 RWKW.

Air fuel ratio varied from about 11.8 - 10. Tuner said it still runs very rich.

I have a SAFC neo comming so that should help things in that respect.

Does any one know why my car needs more timing than a normal r33?

And what do you guys think about the power figures? any thoughts?

Total aftermaket mods to this stage are,

- pod filter

- metal intake pipe

- walbro fuel pump

- FMIC delta fin style. piping is hybrid copy.

- dual stage turbo xs boost controller(low 9psi- high 11psi)

- GFB BOV switchable plumb back type.

Thanks for every ones ideas on this thread!

Are the Cams different?

Thats good power for 11psi.

It was more than just one thing wrong, no wonder you couldnt get it right.

I pretty happy :P

As far as i know the cams are stock, The previous owner claimed a rebuild and showed me some photocopy of a trade reciept for acl pistons but npothing else so i am doubtful if it is legit.

The Timing belt was changed a few months ago.

"R33S2" are u asking if the cams are differnet because the CAS seems to be in the far advanced position? im curious as to why this is too?

Yeah two things wrong makes it hard to diagnose, expecially when i ruled out airflow meter my trying two and resoldering one.

Cheers

I pretty happy :P

As far as i know the cams are stock, The previous owner claimed a rebuild and showed me some photocopy of a trade reciept for acl pistons but npothing else so i am doubtful if it is legit.

The Timing belt was changed a few months ago.

"R33S2" are u asking if the cams are differnet because the CAS seems to be in the far advanced position? im curious as to why this is too?

Yeah two things wrong makes it hard to diagnose, expecially when i ruled out airflow meter my trying two and resoldering one.

Cheers

it can mean a few things, aftermarket cams, timing belt fitted right??, qoute me if i'm wrong guys.

Check your Timing Belt Tensioner, they are a spring loaded mechanism from what i remember, if its broken timing belt could be far from taught and the reason you need to run spastic timing, if the covers are on your tuner wouldnt have seen shit.

Good to hear you got it sorted :P

Not surprised the AFM was a problem, but it's quite rare for the stock fuel pressure reg to die in my (limited) experience. I suppose they're not getting any younger so things are going to start playing up.

Dunno about the timing thing - maybe the cams have been timed, ie one or both have been advanced or retarded, so compared to where the CAS normally sits it might be a degree or two out. I'm probably completely off the mark but that's my best guess :rofl:

Your not wrong about these cars not getting any younger,

If it is the timing belt pretensioners woulnd they maybe casue the belt to slip? some times at idle there is a wirring sort of squiggle noise from the cas area. The cas bearings are fine so it may be a pretentioner?

Edited by tmc_2

maybe the timing belt has jumped a tooth on 1 of the cams. how many k's on the car (in total, not just since rebuild). it may be that when the engine was rebuilt they didn't replace the timing belt, and it is due to be changed.

my mates 180sx that is having similar problems is overdue for its second timing belt (its done over 200,000ks). we have to keep the timing fully advanced to get it to perform. we tried jumping a tooth with the cas and it was way too advanced. we think the timing belt may have jumped a tooth.

maybe the timing belt has jumped a tooth on 1 of the cams. how many k's on the car (in total, not just since rebuild). it may be that when the engine was rebuilt they didn't replace the timing belt, and it is due to be changed.

my mates 180sx that is having similar problems is overdue for its second timing belt (its done over 200,000ks). we have to keep the timing fully advanced to get it to perform. we tried jumping a tooth with the cas and it was way too advanced. we think the timing belt may have jumped a tooth.

total kays are 125thou , timming belt done at 117thou and rebuild i am gussing some where between 90 to 110thou.

SO u htink its worth getting then to check the timming belt is its alligned correctly?

Will it be fine to just leave alone?

thans Mad082

so u've still got the stock ecu? prolly best to get a power fc (or other) and get it tuned properly. i.e lean it out a bit, then you'll also be able to pull some timing out. it'll go harder, and it wont chew as much fuel >_<

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Food for thought, the stock oil filter thread is a 3/4-16 UNF, which has an ID of about 10 to 12mm (according to ChatGPT lol). Now compare than to an 10AN, which has an ID of about 14mm (Raceworks is 14.2mm, Speed flow is 14.27mm).  
    • Yep, totally get that. However hooking in for Generator back up is only a few hundred bucks for the wiring. You could put a couple of those in (for different circuits explicitly) and run a couple of baby generators. Bonus, you can balance them across different circuits, and now have backups in your backup. I'm looking at buying places that won't even have water etc, and I don't mind the idea of getting off the electric grid either, even with everything you've said. This country already has enough power outages that even the mains grid isn't that reliable anymore. I do agree though on spending a bit more to get better gear, and to add some extra redundancy in to the system too.
    • You can set hard reserves on your battery system, and it can't be discharged past that.  
    • That sounds like an excellent idea. But total self-sufficiency means exactly that. You have no-one else to blame when your system faults out and you have no power for a week or two while it gets fixed. You'd have to go the whole hog and get a diesel genny and all the switchover gear, to get you through such times. And, despite the fact that over 20 years, my system has been pretty reliable**, I have seen so many inverter explosions (or less dramatic deaths), panel and roof JB fires, and so on, over that time, to know that the stuff is the same as any other bulk Chinese manufactured stuff. The failure rate is well above zero - both on the equipment and on behalf of the meth addled installation labour force. And then..... warranty and means of redress against the supplier you bought the gear from. Best I can tell is that only a handful of solar companies are still around within 5 years of starting their advertising pitch. They disappear and phoenix like crazy. So, as per 1st paragraph, I suspect the only way to is go balls deep and spend maybe 2-3 times as much as you might think, so that you have every base covered. Plus, know and understand your gear intimately, so you can diagnose problems, sort them out yourself, etc, etc. Plus, probably have to consider upgrading various parts as the years pass, to maintain compatibility with newer stuff, performance and reliability, etc, etc. Whereas, remaining attached to the grid has an ongoing cost that keeps going up even if you use bugger all power from it. But it does provide the fallback in case of the worst case with your own gear. You either pay up front or as you go, I suspect.
    • Add more solar panels to the array. Call the electricity company and tell them you're moving out... Live off grid electric wise
×
×
  • Create New...