Jump to content
SAU Community

Recommended Posts

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Term's right - the s1's have a R34 plug on the ECU :P

So for some strange reason nissan decided to put a R34 plug on the S1 Stagea's even though they had the same engine setup as the R33's.

I've got a Stagea s1 ecu pin out somewhere at home. I'll see if I can find it over the weekend.

J

Link to comment
https://www.sau.com.au/forums/topic/149695-power-fc/page/2/#findComment-2795825
Share on other sites

Woah, blast from the past hey Jay

Howdy :O

Yep, thought I'd pop my head in and say g'day. What's it been, about 18 months.. lol

I've seen you around a bit, makes me miss the Stagea :dry:

I'm pretty sure I've got the pin outs around here somewhere, I gave hard copies to Kris when he bought my Stagea but I had electronic copies as well from when I put the Unichip in her.

To be conitued. lol

J

Link to comment
https://www.sau.com.au/forums/topic/149695-power-fc/page/2/#findComment-2796736
Share on other sites

That would be odd, as the RB25DET NEO has VVT where as the RB25DET doesn't. wiring wouldn't have much to do with that.

Perhaps an R33 Powerfc with an R34 plug would solve all our problems?

??cONFUSED??

But I thought the S1 did have VVT?

Well, mine is a 97 S1 and it has VVT on the inlet side...

Link to comment
https://www.sau.com.au/forums/topic/149695-power-fc/page/2/#findComment-2805858
Share on other sites

Here are a few things from my mind.

WGNC34 ----> R34 chassis based, but R33 parts used, possibly to finish stock at Nissan? Maybe they didnt want to release the NEO in the stageas before they did in the Skylines, where the Skylines only came out in 98 with the NEO's and the Stageas in 96/97 could have had the NEO's?

This could account for the mismatching between parts in the Stageas, for example, the rear brakes are different in a model revision in the S1's in late 97. The rear brakes change from the R33 GTS4 to the R34 GT (whatever is N/A and 4wd)

Similar could have happend with the ECU. Also, dont forget that Stageas are detuned in comparison to their Skyline counterparts, not only with power but torque as well. Maybe Nissan decided to go for a newer ECU in the Stageas as it was released later (96, compared to R33's in 93) and it was difficult to pass emissions regulations etc? Who bloody knows, but its a freaking mix and match these cars!

ALSO. Both the S2 R33 engines and R34 engines have VVT, just on the R33's the VVT is on/off, where on the R34 engines it is infinatly variable. THis is what helps the NEO's be slightly better on the fuel.

To also clear up a few other things, R33 S2 turbos have Nylon compressor wheels, the same as the R34 NEO turbos.

Link to comment
https://www.sau.com.au/forums/topic/149695-power-fc/page/2/#findComment-2805932
Share on other sites

OK, to add to the questions here (and hopefully help reduce some of the confusion), my question is this:

Seeing as the s1 Stagea has what seems to be the R34 plug, and Stageas, s2 R33's and R34's all have VVT, would there be any issue in using the Neo PFC with the Stagea (i.e., could the R34 PFC be made to run the VVT in on/off mode on the s1 Stagea instead of in constantly variable mode)?

If this is a possibility, then maybe all of us manual-boxed owners can go straight to the R34's PFC (apparently like Ska's runs) and avoid re-wiring the plugs, and just run them in switchable VVT mode, right?

I had my cousin's R33 (s1) standard ECU here for a while, but never got a chance to remove the one in my Stagea and compare the two. Might have to see if I can borrow it back.

Link to comment
https://www.sau.com.au/forums/topic/149695-power-fc/page/2/#findComment-2806719
Share on other sites

I think Ska may already have the proof, if he definately has an R34 PFC, and can confirm that the ECU plug hasn't been replaced. I'd still like definate confirmation if the R34 PFC will run a series one stagea though.

Link to comment
https://www.sau.com.au/forums/topic/149695-power-fc/page/2/#findComment-2809943
Share on other sites

Would you like me to find a digital camera and go take a picture of it, it's easily accessable now, found it when I took my dash out to do the heater core and put it back in the place it should be, near the passengers foot on the left.

Will need to find a digital camera but................

Link to comment
https://www.sau.com.au/forums/topic/149695-power-fc/page/2/#findComment-2810223
Share on other sites

Would you like me to find a digital camera and go take a picture of it, it's easily accessable now, found it when I took my dash out to do the heater core and put it back in the place it should be, near the passengers foot on the left.

Will need to find a digital camera but................

I think that would be a great idea Cy. I'll do the same with my standard ECU (assuming it's easy to reach), and we can go from there...

Link to comment
https://www.sau.com.au/forums/topic/149695-power-fc/page/2/#findComment-2810741
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...