Jump to content
SAU Community

Recommended Posts

The next Winton Fun Day is scheduled for Sunday January 28th 2007.

The Fun Day is a "come and try" day and is designed to allow the average motorist access to a real race track under controlled conditions.

Cost:

Is $25 per driver and $25 per passenger

Programme:

Normally be there by 8.00 for scrutineering, but this can take some time.

Drivers Briefing at around 9.00 - 9.30

Driver only on track for 30 minutes sighting laps, then

Driver with passenger for 30 minutes, then

Driver only on track for 30 minutes, then

Driver with passenger for 30 minutes, then

Driver only on track for 30 minutes, and so on all day until about 4.30

Requirements:

Bring your car, an Australian Standard Approved helmet, the helmet can be either open or closed face, fire proof clothes that cover you from neck to ankle to wrist (cotton or wool clothes are good). Runners are not the preferred footwear, Blundstones boots (or similar) or any leather type shoe is preferable

Make sure your car has no oil/coolant leaks, fitted seat belts, battery is secure, wheels nuts are tights, no loose items in the car or boot.

The Car does not have to be registered, but has to road/race worthy. Tyres need to be in good nick, tread depth is not normally a problem unless wire is poking out.

There are normally no checks done of lights except for brake lights except if it is an overcast, rainy day, then there may be checks for lights as well as wipers.

Tow bar tongues and bull bars must be removed.

You do not need to have a race licence, club licence or indeed a car licence abut you must be over 16 to drive or be a passenger.

And very importantly, bring a smart, alert attitude, coz there is some very fast cars out there, whilst it is not a race meeting, some people bring race cars and we push them hard to behave appropriately around first timers.

Food and drinks are available through a canteen.

Link to comment
https://www.sau.com.au/forums/topic/149944-winton-fun-day-a-come-and-try-day/
Share on other sites

I'm in Mt Beauty that weekend so I might stay on an extra night and have a go. I have a mate coming too. Can we share the driving in one car?

Russ

Yep, but you both need to pay and get a wrist band.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...