Jump to content
SAU Community

Recommended Posts

well i finally bought my car after 5 months of waiting to import etc i got one from here

nice 180sx 95 model with afew light mods =0

so its 10 at night and iam leaving my girlfriends place

so i say good by give her a kiss and goto press the disarm button on the remote but i dont! i press the remote start button by accident

my car starts up and starts moving preety quickly might i ad.

so my g/f goes OMG ! THE CAR so i start running for it try to open the doors they are lockedd

drag onto the car

dosnt stop

so the car manages to get half of it self onto the lawn of the foot path missing 5 trees by 10 cm

gets off the lawn 1 meter till it hits the main rd

i manage to press the right button while draagging onto it and running aftter it and it stops

1 meter from the main rd with about 10 cars camming its way

all i can sy is thank you GOD!

THANK YOU SOO MUCH!

taking it tommrow to take off remote start =)

after that i noticed when i was driving i didnt pay much attention to it when i first bought the car

but when i was driving home after the great incident i was checking to see if my wheel alinment was straght so i put the steering wheel straght and it went straght but i noticed that when i was driving the steering wheel wasnt actully perfectly straght it was slighly to the right a fraction.

so if i did put it dead straght it would go towards the left a little bit.

but if i left go of the wheel and let it go straght the car goes straght but the steering wheel is actually a fraction to the right.

now i wanted to ask ? 1 was this already there and i didnt notice it from the start i think so =)

2. is it the steering wheel, if it was taken out and put back in wasnt put in the exact same spot? (its a standard steering wheel with airbag)

3. could of m car going on the footpath a little bit put out the wheel alinment and steering alinment =)

let me know what ya think guys thanks =-)

Firstly, DON'T LEAVE THE CAR PARKED IN GEAR. Well you can, but you risk that happening, and you can't use a turbo timer.

Secondly, get a wheel and steering alignment done, it'll fix up that steering wheel.

i fitted a remote start to my car and the guy who fitted it made a point of talkin me into buyin a neutral safety switch cost $50 from autobarn basicly if the car in gear it wont start. plus on my alarm system i need to have the h/brake up so im protected 2 ways!! and its already payed for its self last week i left the car in gear after movin it a few meters forgot that it was in gear and tryed to start it by remote all i can say is im glad i got it and payed the $50

and it works!!

lmao.... u ricers and ur remote starts :)

for gods sake whats so hard about turning the damn thing on with the key? lol

anyways... u are definately god damn lucky :( funny as hell story tho (only cause it didnt end in tragedy :))

reminds me of the person who went to Jeep and got it installed in their brand new Jeep... did the same thing... left it in gear but it ended up plowing into a colid concrete wall rofl.

hahaa very lucky Dragon18! :)

i don't really get this remote start thing...i mean, why does the car take off if you've only turned the engine on and no one's touching the accellerator? :confused:

am i missing something....

hmm, blame the blonde hair :(

It's not rocket science, get in your car, stick it in first and crank it over (handbrake off, feet off the pedals) The car will lurch forward and start and travel forward at idle speed. BTW an auto will not start in gear, they have a neutral (or park) safety switch standard.

hahahah thats funny shit

my 33 had that until i lent it to a mate. told him ten times not to park it in gear

he came back the next day with a new front bar form me lol

parked it behind a car and auto started it and it drove into the back of the next car

pete

my remote start if set in for a manual car, will only let you start it if it knows the car is in netural. The way it does this is - after the turbo timer has shut the car down, if a door is opened, it will not work until the car is runnning again.. this just means that if someone opens your car and puts it in gear without u realising, then u wont start it in gear. However, mine is set for auto, so I can start whenever - i never leave my cars in gear.

I'd disable that man.. sounds dangerous! remote start is illegal in VIC.. basically law in VIC is if you're not in the car in can't be running - yes b.s. but true.. That means a turbo timer is also not allowed here either unless u sit in the car while it times down. Useless facts of the day

I'm always tripping my alarm on/off switch in my pocket.. so you wanna watch it with something like a remote start.

hey Dragon18, good to hear that you finally got the 180 u've wanted for soo long!

but didn't u get one imported thru Craig? i think i remember u putting pictures up about it a little while ago.. :confused:

Originally posted by rb26dett

how would the car continue travelling?? if the accelerator is not applied, wun that mean that the car wun have sufficient power to drive the car? wun the engine stall??

and if it stalled, wun the engaged gear stop the car from moving??

wun do you mean?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...