Jump to content
SAU Community

Recommended Posts

hey everyone,

Just a quick question, can anyone tell me some good places to find some parts for skylines in melbourne preferably eastern suburbs or city but doesn't have to be - looking for A'Pexi safc or boost controller, or even shops who sell cheap Pioneer subs and good quality Amps (Alpine, Pioneer, Fusion etc.).

Cheap is what i'm looking for - so anything cheaper then places such as Autobarn, Strathfield etc would be fantastic as i already know what their prices are.

Cheers :uh-huh:

Link to comment
https://www.sau.com.au/forums/topic/15009-melbourne-parts-dealers/
Share on other sites

didya get my last PM? and yep i probably will go for a safc before a b/c but i'm just trying to get some idea of places to look at whilst i'm down there - i'm going to mainly concentrate on my sound setup after my alarm is fitted on monday, once i get that good then it'll a safc and b/c

Originally posted by KamikazeR33

also http://www.skylinesaustralia.com/forums/sh...&threadid=14456

Join in this group buy.

Where else are you going to find a new 4x100Wrms amp for $333. Reveiws have also been very good on these amps, just do a search.

  • 2 weeks later...

KK13

I've had a bit done there over the last couple of years.

Mostly recently a full engine rebuild. Piston No 6 went boom. I didn't have a lazy 3-4K to buy a second hand RB20DET so I gave him the challange of coming up with an option to repair what we had.

The compromise we reached was sending the head off to get checked, and replacing the bottom end.

It took a lot of labour, but I got it back on the road for only $1500!

I had quotes done with other mechanics in the area and didn't get one under $5000, so I was pretty impressed.

Another incident was the death of my air flow meter - I was all ready to go out and buy a new one, he (John) checked it out with Injectronics - and they were able to repair/re-engineer it good as new. - again saving a wad of cash.

I've never had an issue with any of his work (as no apprentice is allowed within 100m of the car), and the motor is pulling as strong as ever.

I could go on, but my point is: He doesn't shit you - if the car doesn't really need a new ***whatever*** he wont insist that you buy one. And he gives you options, eg. you could replace it for x$, we can get a second handy for x$, or repair the existing one for x$. - and his work is of a high standard, and he has a lot of the spare parts in stock.

(Long answer, but I hope it helps you find a good mechanic) - There's nothing worse than not having one.

Yeah he does my servicing as well.

Oil changes, checking all the fluid levels in all the spots there is fluid - suspension, transmission etc..., does suspension work, brakes, (he doesn't do panel beating or resprays - as far as I know anyway)

He's got a few 33's on the books (at least there has been one or two around there when I've picked up my car before)

Pretty cheap...I'm trying to remember....the oil was pricey as I use a 5W-30 ish synthetic Penzoil. I'm pretty sure it was less than $200 by a fair whack though.

I'm not sure on his stock of R33 spares, but I've seen at least a few bars down there. I know he doesn't really sell full cars, more into parts, servicing and fixing our f**k ups.

Oh and the best thing I forgot to mention - he is open late, like 9pm late! - so you can go around after work to pick up your car. It makes things so much easier than mechanics who shut up shop by 5pm.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...