Jump to content
SAU Community

Recommended Posts

alright let's get this discussion underway.

ITB throttle bodies + custom adapter plate + custom trumpets.

pros?

- increased power

- increased response

- the sound!

- watching the butterflies open and close :D

cons?

- cost. i have no idea, but judging by the costs of rb26 throttle bodies, and the cost of relocating a few things, custom bits and pieces (1-1.5k ??).

- r&d required for tuned length intake runners (adjustable runners?) narrow power band.

some other things to bring up:

- cheaper to use RB26 throttles or buy some pre-fabricated ones?

- legalities?

- adapt small pod filters onto the end of each.

- anyone who is (knows of someone) who is cluey with ITBs? mainly hondas, mini, porsche, and old school nissan owners with some know how.

R.I.P.S in new zealand makes adaptors for rb26 throttle bodys to rb25 heads. if rb26 ones are hard to find use some 4age throttles. sure you will need 2 sets but they will still work but thats alot more custom parts though... they make small air filters to fit on ITBs

you would be lucky to find a direct fit kit as nobody really makes performance parts for NA skylines. i havnt even seen an after market intake pipe...

It's not the first question? Or it's not in a 33? :huh:

the later, its an R32 - the headlight and grill are a dead giveaway.

R.I.P.S in new zealand makes adaptors for rb26 throttle bodys to rb25 heads.

you would be lucky to find a direct fit kit as nobody really makes performance parts for NA skylines. i havnt even seen an after market intake pipe...

agree. worked NA skylines is hardly widespread in japan let alone anywhere else.

any idea on the cost of these adaptors Geoff? might be a cheap alternative to using an RB26 head.

if you were going to do this you'd need to go all out.

forged high comp pistons, lighter rods, balanced bottom end with around 11.5:1 Comp ratio, some nice meaty cams, maybe 288's or something around that with a shortish duriation but high lift. basically want to make the bottom end hold together and swing to around 10,000 rpm.

defo use a plate and use the RB26 ITB's, make some nice and long intake trumpets, big air box feeding air direct to all of them.

and then put it in something light...

those of you who frequent these formus will remember not to long ago i did a write up on my car well i've changed direction and kept it rb25 and gone hi compression.

looking at anywhere from 11.5:1 to 12:1. did alot of work to the head including lifting all the buckets getting all the valves reseated and 5 angel cut ( takes a long time is expensive but its the best!!) new valve springs and of course a port and polish. getting the intake polished and the manifold double split. getting the whole lot balenced before she goes back on to. slotted in new fuel rail to support 440 injectors. big cams, cam gears blah blah blah.

forgotten a few things im sure but you get the idea. After many weeks and many long hours i get her back this week and put it back on this weekend. so if anyone is after figures i'll have them next week after she goes to the tune shop.

as for ITB's i did alot of research on cost gains everything and they just not worth it. the gains you get can be gotten elsewhere for much cheaper and its nothing you can't tune around if you have a good computer and a tuner who knows what their doing. that being said the sound and look is unbeatable.

Do not use mini pod filters or socks to filter your throttles.....this completey wrecks the point of having a trumpet on there as it create far to much disturbance in the air flow as it try to pass over the trumpets completey wrecking there use.

There is a certin filter used by club cars and bikes which was invented in UK and are now made in Australia also. It other full filtering but with zero restiction.

When i had my hachi i spoke to a guy in UK who builds race engine which have quad throttle bodies and he has had gains of up to 30hp by just pulling off the sock filters and using these special made items along with a good setup.

I would make a base plate that sat on the lip that rolls back over the outside of the trumpet so it has more volume area to suck from and have one big single filter over the whole set of throttles making sure you give atleast 2cm of gap from filter to the ends of each trumpet. The filter is not like ur pod filter type it more like a long bubble looking filter thats made of 3 different filter materials.

If you need more info about these special filters that other full flow and zero restriction hit me PM and i can try to find his email address.

But when it comes to NA you want to try and get every extra HP you can and use your main source of air flow to its max potential.

- Luke

the later, its an R32 - the headlight and grill are a dead giveaway.

agree. worked NA skylines is hardly widespread in japan let alone anywhere else.

any idea on the cost of these adaptors Geoff? might be a cheap alternative to using an RB26 head.

um from memory it was about $500 witch to me seemed expencive.. but then it means it would fit well.

a super high powerd na car would be almost undrivable on the street i recken.

im aiming for about 150kw witch i have reciently found out is quite easily achievable with my rb30de.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...