Jump to content
SAU Community

Recommended Posts

are these the ones with the old fighter-jet engines? or was it rolls royce :(

I don't know about old fighter-jet engines but it had a 6.75 litre V8 and Bentley used to be owned by the same group that owned Roll Royce and they shared the same engines (to my knowledge).

Edited by writeoff
  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

S**t mate... glad to hear your are relatively ok....

Doesn't look too repairable does it?!

Maybe you can take those ultra comfy rear seats and make them into a couch!!

Good luck no matter what happens... I hope Insurance don't stuff you around

man, that sucks.

at least your car held up pretty well though,

we'd all be hearing about a fatality on the news if you were in anything else i reckon.

hope insurance takes of ya mate.

are these the ones with the old fighter-jet engines? or was it rolls royce :laugh:

youre thinking about a drag car with a rolls merlin in it.

in no way street legal.

Maybe you can take those ultra comfy rear seats and make them into a couch!!

I'd actually thought about that because I have really old shitty couches at home and the ones in the Bentley are waaayy more comfortable. The ones in the front were 4 way (8 if counting both directions) adjustable electric seats.

its a shame about your bentley dude.... i remember picking one of my cars up from the docks out at outer harbour and seeing this thing, was in REALLY good nick couldnt believe my eyes when i saw it..... was like WTF???? a BENTLEY????????

Shit a brick. I drive to this intersection everyday.

I saw the marks last week and was terrified as to how far the marks do for.

im really glad ur safe and sound. I am also hoping the others in the accident are ok too.

Yes it might have been her fault but dam mate to push ur car across all four lanes she must have been going fast. maybe trying to make it around the corner.

I hope all goes well for you buddy.

Yes it might have been her fault but dam mate to push ur car across all four lanes she must have been going fast. maybe trying to make it around the corner.

I can't comment on fault as that has yet to be determined and I have no idea what speed she was doing but you're right about pushing a car weighting 2200kg across four lanes of traffic I suspect she was going faster than I was - 60-62kmph.

The cop I spoke to last Friday said there had been another accident that same night at the same intersection which also took out one of the traffic lights. Busy night.

Eww nasty! Well my dad has a 1987 Bentley Mulsanne With fuel injection (one of a few with it) and they have basically the same chassic with the beastly 6.75L V8. Hate to see your Bentley Eight wrecked. Glad you were in it rather than a commodore ;), probably saved your life. Bad luck on that loss though.

I've seen one of those cars and it was in the classic adelaide.

They were made either before WW2 or after.

And they had a airplane engine in them.

They sound awesome.

I can't see why they aren't street legal.

writeoff,

Sad to hear buddy. I've seen that car once in the flesh and I was in awe of how clean the thing was. It looked/looks simply awesome.

Sad to hear an old classic beast may join the wrecking yards, glad to hear your ok.

I know that intersection very well.

agreed - but i dont think they are the only ones shitting themselves..........

.....and this is the reason - insurance are probably shitting themselves as well....

Actually I think that the insurance company won't come ouy so bad on this. Redbook values are quite low and I imagine that as spare parts (engine, interior, pannels etc) it would be worth quite a bit to prestige wreckers. See extract from Redbook AU:

Red Book Code BENT89AB

1989 BENTLEY EIGHT

Sedan 4dr Auto 3sp 6.8i

Trade in price guide* $24,600 - $29,600

National average price - private sale* $30,100 - $37,700

Price when new (RRP) $261,626

Actually I think that the insurance company won't come ouy so bad on this. Redbook values are quite low and I imagine that as spare parts (engine, interior, pannels etc) it would be worth quite a bit to prestige wreckers. See extract from Redbook AU:

Red Book Code BENT89AB

1989 BENTLEY EIGHT

Sedan 4dr Auto 3sp 6.8i

Trade in price guide* $24,600 - $29,600

National average price - private sale* $30,100 - $37,700

Price when new (RRP) $261,626

The car was insured for an agreed value based on the condition and low kms on the car - 51,360km for a 17yo car - which was determined by the insurance company. I think you're right about the spare parts being worth a bit though.

Edited by writeoff

Just had a phone call from the insurance assesser who stated that the rear end was completely twisted and that the car is a total write off.

Personally my movement has improved to the point where I can turn my neck nearly 70 degrees (up from 15 degrees) although I struggle to tilt it back. My knee has most of its range of movements although still hurts to bend or put my weight on it, my back has limited range of movement and my ribs ache and are causing the most amount of pain.

I drove my mates Honda CRX yesterday for about 4km which was the first time I had driven since the crash. I went okay but didn't need to check my blindspot which is my biggest concern. Speed humps are evil if you have sore ribs!

Edited by writeoff
  • 2 weeks later...

I receievd a cheque today from Shannons for the agreed value of the Bentley (minus the outstanding amount on the policy as I paid monthly). No excess was deducted. Just 17 working days from when I informed them of the accident until I had a cheque in my hand. All contact with the assesser and claims department was very kind and helpful. Big thumbs up for their service. Much better than other insurance companies that I have dealt with. Happy to have my Skyline GTR and Peugeot still insured with them.

I receievd a cheque today from Shannons for the agreed value of the Bentley (minus the outstanding amount on the policy as I paid monthly). No excess was deducted. Just 17 working days from when I informed them of the accident until I had a cheque in my hand. All contact with the assesser and claims department was very kind and helpful. Big thumbs up for their service. Much better than other insurance companies that I have dealt with. Happy to have my Skyline GTR and Peugeot still insured with them.

Good to hear its all been sorted and that your ok, terrible luck indeed.

Finally some positive feedback about claims for an insurance company.

for the distance you were pushed the car looks to be in pretty good shape. but it doesn't take much to write off a car nowdays. but the time you have to replace lights, panels, paint, it all adds up pretty quick.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
×
×
  • Create New...