Jump to content
SAU Community

Recommended Posts

This is just an idea, i want to see if anyone is interested in this.

My idea is to have a "just in case thread". The idea is that you an post up items(skyline parts) that you have sitting in your shed, laundry, kitchen etc. so that if something happens to go wrong with one of our cars at an awkward time, or maybe someone has to go over regency, we can look at borrowing a part for a short time just to get things moble again. I'm thinking things like AFMs, coils, ECUs, stock intercoolers, piping, fuel pumps.... the list goes on. Items could also be bought i guess but that's up to the individuals to determin. I'm thinking of this thread as a reference to who has what.

There are a few rules that i have thought of to make it go smoothly

-the thead is only to be used as a reference to who has what, wheelings and dealings are left to PMs and the individual.

-only one post in the thread per person(use the edit function to update)

-no chit chat

-discussion kept to pm

-listing in the thread does not mean you have to lend items to everyone, the individual can choose not to lend the items for any reason they wish

-terms of the lending of the items is up to the individual. for example, costly items or people that you don't know may require deposit, photocopy of a licence or something???

Well, that's all i've got for now, if anyone has any ideas, comments etc feel free to post them up. If people like the idea we can ask cubes very very very nicely if he can sticky a new thread up, if no-one likes the idea we can scrap it!

Thanks for reading

Aaron :kiss:

Edited by Race__24
Link to comment
https://www.sau.com.au/forums/topic/150617-the-just-in-case-thread/
Share on other sites

edit. - sorry, sum1 took it. (standard 33 airbox - free).

edit 2. - just found a HKS (copy) SSQV BOV i used to have on my old car, pretty much brand new only been used couple months, and has an adapter to DIRECTLY bolt onto a RB25 (had a custom adapter made at ET).(cost just over $200 couple months ago with the custom adapter). Ill also give the universal adapter away with the BOV, which u can weld into the intercooler piping, so it can fit any car.

$150

Edited by KISIN

maybe we should organise a r32 and r33 regency pack with std items like shocks, exhaust etc that we can have people use to get through, then all items are stored until someone else needs them?

Maybe like donate the items to be held at a single location, then lent out (with a deposit) as needed?

Obviously someone would have to keep the items to be given out, and organise it all...

maybe we should organise a r32 and r33 regency pack with std items like shocks, exhaust etc that we can have people use to get through, then all items are stored until someone else needs them?

Maybe like donate the items to be held at a single location, then lent out (with a deposit) as needed?

Obviously someone would have to keep the items to be given out, and organise it all...

Thats a awesome idea would save a lot of time and $$$ for those unlucky defected ppls

BTW I have stock 32 air box and soon fuel pump and cooler, happy to donate these to the '32 regency pack'

4 sets of stockies (14", 4x114.3 stud pattern)....backup drift/skid rims

1 complete set of coil packs and bracket (just incase the falcon system fails - 12mths and no problems yet)

RB30 motor (not mine but a worst comes to worst just in case)

2 standard rb25det dump pipes and engine pipes to suit both r31 and r33

r31 and r33 air boxes

2 standard side mount intercoolers with piping.

2 spare coil packs

standard and lowered springs for r31

assorted rb30 rb25det engine parts, coil, leads, aac, tps, afm

3 x r31 silo stockies

1 x 4stud cop rim

r32 manual gearbox x member

assorted dash buttons and blanks for r31

2 x clusters for r31

all sorts a shit

oh and a wealth of knowledge about both cars. hehe.

Edited by Ryanrb25

Ok, there seems to be a bit of intrest.

*****MODS (cubes) could we have a fresh thread stickied please??? or maybe just trim the chat out of this one?????

I was kinda meaning to have this one just to show interest, and air ideas. Good on you guys for jumping in there, shows how keen we are to help others out :/

I've got the following from a S1/2 R33

Standard dump

Standard cooler

Standard Air box and snorkel

Standard S2 ECU

HICAS unit with arms

Edited by Race__24

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
    • I saw your intro update, are you sure you've actually had a starter motor failure? You mention it could be the alarm causing it. I'm assuming you've got a no start issue, but what are the exact symptoms, as there could be a few reasons it has stopped wanting to start.
×
×
  • Create New...