Jump to content
SAU Community

Recommended Posts

Dan's on holiday at the moment and working from home.

Best way to contact him is his e-mail address, so e-mail him and he'll give you a contact number. Awesome guy and he's doing my major service this weekend.

He's been building a RB30/25 for somebody as of late and it sounds like he gives it 100% too.

He'll of course try his best to find out what caused it too so you know what else may be at fault.

Good luck and sad to hear about the engine!

i used john hill of JHH Engineering, prolly the best performance engine builder in aust thumbsup.gif

thats the funniest thing i have read in a long time, id be more worried about finding more sand in my engine than in the sahara desert.

thats the funniest thing i have read in a long time, id be more worried about finding more sand in my engine than in the sahara desert.

Hey Ben,

I know of another mechanic who used to send his work to JHH and suffered the same sandy fate.

thats the funniest thing i have read in a long time, id be more worried about finding more sand in my engine than in the sahara desert.

from what i heard all u got done to the head was sandblasted and john gave it back to you, so if u didnt check it, its ur own fault :worship:

the head was sandblasted and ported by somewhere else and given the workshop in question for a full head service, that includes cleaning out the head.

But you really are the expert on heads arent you shane????

from what i heard all u got done to the head was sandblasted and john gave it back to you, so if u didnt check it, its ur own fault :huh:

You should really try not to make comments like this when you have no idea. Who gave you that information?

The head was sandblasted and ported and John was fully aware that the head had been on the sandblaster. The head was completely stripped when I gave it to him and I payed in the vacinity of $600 for a complete head service including valve regrind etc.

The block and head are at another engineers now after engine failure and it has been found that the gallery plugs have not been removed from the block or head. The gallery plugs were not removed from the crank AS REQUESTED for cleaning, and the cylinders were bored with insufficient clearance for the pistons even though the spec sheet was supplied with the pistons.

As a result he destroyed a set of ROSS piston rings

He nearly destroyed a full set of brand new ROSS pistons

He destroyed every main and conrod bearing.

He nearly destroyed a brand new N1 oil pump

As I am a man of my word I am covering the engine under warranty. This is costing me around $1000....maybe a little more.

So please do not make comments like these when you don't know what really happened.

Oh, and I'm not bagging out JHH engineering either....who knows, maybe he just forgot to check that stuff in his old age. Fact is I payed him for a job and he only did half. I know I will never use them again and I will never recommend them to anyone ever again. I think I payed for that right.

You should really try not to make comments like this when you have no idea. Who gave you that information?

The head was sandblasted and ported and John was fully aware that the head had been on the sandblaster. The head was completely stripped when I gave it to him and I payed in the vacinity of $600 for a complete head service including valve regrind etc.

The block and head are at another engineers now after engine failure and it has been found that the gallery plugs have not been removed from the block or head. The gallery plugs were not removed from the crank AS REQUESTED for cleaning, and the cylinders were bored with insufficient clearance for the pistons even though the spec sheet was supplied with the pistons.

As a result he destroyed a set of ROSS piston rings

He nearly destroyed a full set of brand new ROSS pistons

He destroyed every main and conrod bearing.

He nearly destroyed a brand new N1 oil pump

As I am a man of my word I am covering the engine under warranty. This is costing me around $1000....maybe a little more.

So please do not make comments like these when you don't know what really happened.

Oh, and I'm not bagging out JHH engineering either....who knows, maybe he just forgot to check that stuff in his old age. Fact is I payed him for a job and he only did half. I know I will never use them again and I will never recommend them to anyone ever again. I think I payed for that right.

WELL I WOULD PUT IN A VOTE FOR JOHN AND WILL AT JHH.

BUILT MY RB25/30 DET AND IT GOES LIKE A SHOWER OF SHIT FOR A 35/40, STANDARD VL FUEL SYSTEM AND 25 INJECTORS. IM VERY HAPPY AND IN THE EVENT I GET ANOTHER PROJECT CAR(f**kED IF I WOULD PUT MYSELF THROUGH IT AGAIN) I WOULD DEFINATELY GO TO HIM AGAIN.

HORSES FOR COURSES BUT I WAS HAPPY.............

MY 2C

CHEERS

IMTORQING

WELL I WOULD PUT IN A VOTE FOR JOHN AND WILL AT JHH.

BUILT MY RB25/30 DET AND IT GOES LIKE A SHOWER OF SHIT FOR A 35/40, STANDARD VL FUEL SYSTEM AND 25 INJECTORS. IM VERY HAPPY AND IN THE EVENT I GET ANOTHER PROJECT CAR(f**kED IF I WOULD PUT MYSELF THROUGH IT AGAIN) I WOULD DEFINATELY GO TO HIM AGAIN.

HORSES FOR COURSES BUT I WAS HAPPY.............

MY 2C

CHEERS

IMTORQING

That's nice....but why are you shouting?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...