Jump to content
SAU Community

Recommended Posts

probably not real c/b dude....

real c/f is like $1200+

I have never seen a fake carbon fibre bonnet as there is no plant i know of capable of dipping such a large object nor would it be of any financial gain to do so.

I think you mean or what you should mean is this.

Carbon fibre bonnets purchased under $1000 are usually fibre glass based with the top layer being carbon fibre.

You get the look but not the structural advantages that you do with a complete carbon bonnet.

This is much cheaper and what most cheap Carbon Fibre bonnet makers do.

It is still "real" carbon fibre.

I have never seen a fake carbon fibre bonnet as there is no plant i know of capable of dipping such a large object nor would it be of any financial gain to do so.

I think you mean or what you should mean is this.

Carbon fibre bonnets purchased under $1000 are usually fibre glass based with the top layer being carbon fibre.

You get the look but not the structural advantages that you do with a complete carbon bonnet.

This is much cheaper and what most cheap Carbon Fibre bonnet makers do.

It is still "real" carbon fibre.

totally different car here but the last quote I had for a real on e was excess of 2.5k full CF.

totally different car here but the last quote I had for a real on e was excess of 2.5k full CF.

Eastbear, Stout, Jun full carbon fibre bonnets are around $850-1300 plus delivery from Japan.

Its just unfortunate that delivery costs so much :P

Also when a full carbon bonnet has been made within Australia and has been crash tested this will see a large increase in price.

Eastbear, Stout, Jun full carbon fibre bonnets are around $850-1300 plus delivery from Japan.

Its just unfortunate that delivery costs so much :glare:

Also when a full carbon bonnet has been made within Australia and has been crash tested this will see a large increase in price.

Been done Aaron, Custom Carbon has bonnets last I knew with ADR Stamp for approval if I remember correct

CUSTOMCARBON.COM.AU

post-146-1168421904.jpgpost-146-1168422286.jpg

Been done Aaron, Custom Carbon has bonnets last I knew with ADR Stamp for approval if I remember correct

CUSTOMCARBON.COM.AU

post-146-1168421904.jpgpost-146-1168422286.jpg

yep and thats who quoted me on the one for my 2006 holden combo..

Just out of interest I got pulled over today and fined for not having a mod plate for the pod and micrrotech ecu $75 no points BUT he made no mention at all about my carbon over fibreglass bonnet but then again I didnt ask either lol

Just out of interest I got pulled over today and fined for not having a mod plate for the pod and micrrotech ecu $75 no points BUT he made no mention at all about my carbon over fibreglass bonnet but then again I didnt ask either lol

WOW Terry your pod is secured... Yeah...

How did they get you on the ECU??? How did they even know???

Pod is secure, I have a handset for the microtech and he knew what it was, to be clear on this it wasnt a defect, it says on the fine "drive vehicle if equipment does not comply with the vehicle standards" (word for word there) offense details "pod airfilter, aftermarket computer" I'm not too concerned but the gist of it was, I didnt have a mod plate for anything and he wants me to get one to comply with the law, he could of defected the car but let me off with this as a warning. I have a feeling he just wanted to look at the car and then started telling me about his RX3 with a microtech and all the shit he went through with it even tho he is a cop lol. The reason he pulled me over was, I was be tailed by this total f**kwit who was tailgaiting me for ages and when I got to an intersection, I blasted through it to leave him behind, he was somewhere close and heard the roar and blow off.

i knew that mr-toy i just made the post cause ive seen a few ppl around wanting c/f bonnets cheap...i thought that was cheap

2 yrs ago mine cost me $800 in Hong Kong, it cost $3-400 to import.

why bother paying that much for something that you can only use on the track but i dont have a car so thats just my opinion

My bonnet had a acid rain look to it and a good respray was quoted at $750, this way I get a spare bonnet and no respray hassles, straight up bolt on all I had to do was switch the water spray nozzles.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...