Jump to content
SAU Community

Recommended Posts

probably not real c/b dude....

real c/f is like $1200+

I have never seen a fake carbon fibre bonnet as there is no plant i know of capable of dipping such a large object nor would it be of any financial gain to do so.

I think you mean or what you should mean is this.

Carbon fibre bonnets purchased under $1000 are usually fibre glass based with the top layer being carbon fibre.

You get the look but not the structural advantages that you do with a complete carbon bonnet.

This is much cheaper and what most cheap Carbon Fibre bonnet makers do.

It is still "real" carbon fibre.

I have never seen a fake carbon fibre bonnet as there is no plant i know of capable of dipping such a large object nor would it be of any financial gain to do so.

I think you mean or what you should mean is this.

Carbon fibre bonnets purchased under $1000 are usually fibre glass based with the top layer being carbon fibre.

You get the look but not the structural advantages that you do with a complete carbon bonnet.

This is much cheaper and what most cheap Carbon Fibre bonnet makers do.

It is still "real" carbon fibre.

totally different car here but the last quote I had for a real on e was excess of 2.5k full CF.

totally different car here but the last quote I had for a real on e was excess of 2.5k full CF.

Eastbear, Stout, Jun full carbon fibre bonnets are around $850-1300 plus delivery from Japan.

Its just unfortunate that delivery costs so much :P

Also when a full carbon bonnet has been made within Australia and has been crash tested this will see a large increase in price.

Eastbear, Stout, Jun full carbon fibre bonnets are around $850-1300 plus delivery from Japan.

Its just unfortunate that delivery costs so much :glare:

Also when a full carbon bonnet has been made within Australia and has been crash tested this will see a large increase in price.

Been done Aaron, Custom Carbon has bonnets last I knew with ADR Stamp for approval if I remember correct

CUSTOMCARBON.COM.AU

post-146-1168421904.jpgpost-146-1168422286.jpg

Been done Aaron, Custom Carbon has bonnets last I knew with ADR Stamp for approval if I remember correct

CUSTOMCARBON.COM.AU

post-146-1168421904.jpgpost-146-1168422286.jpg

yep and thats who quoted me on the one for my 2006 holden combo..

Just out of interest I got pulled over today and fined for not having a mod plate for the pod and micrrotech ecu $75 no points BUT he made no mention at all about my carbon over fibreglass bonnet but then again I didnt ask either lol

Just out of interest I got pulled over today and fined for not having a mod plate for the pod and micrrotech ecu $75 no points BUT he made no mention at all about my carbon over fibreglass bonnet but then again I didnt ask either lol

WOW Terry your pod is secured... Yeah...

How did they get you on the ECU??? How did they even know???

Pod is secure, I have a handset for the microtech and he knew what it was, to be clear on this it wasnt a defect, it says on the fine "drive vehicle if equipment does not comply with the vehicle standards" (word for word there) offense details "pod airfilter, aftermarket computer" I'm not too concerned but the gist of it was, I didnt have a mod plate for anything and he wants me to get one to comply with the law, he could of defected the car but let me off with this as a warning. I have a feeling he just wanted to look at the car and then started telling me about his RX3 with a microtech and all the shit he went through with it even tho he is a cop lol. The reason he pulled me over was, I was be tailed by this total f**kwit who was tailgaiting me for ages and when I got to an intersection, I blasted through it to leave him behind, he was somewhere close and heard the roar and blow off.

i knew that mr-toy i just made the post cause ive seen a few ppl around wanting c/f bonnets cheap...i thought that was cheap

2 yrs ago mine cost me $800 in Hong Kong, it cost $3-400 to import.

why bother paying that much for something that you can only use on the track but i dont have a car so thats just my opinion

My bonnet had a acid rain look to it and a good respray was quoted at $750, this way I get a spare bonnet and no respray hassles, straight up bolt on all I had to do was switch the water spray nozzles.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
    • Hi @Chupapy i had several leaks from coolant pipes being corroded, i also had one leak on back of the head onto transmission. For me that leak was from the turbo water line. Follow the line to the back of the head The hose and metal pipe had perished these are the best pics I took of it at the time
×
×
  • Create New...