Jump to content
SAU Community

Recommended Posts

probably not real c/b dude....

real c/f is like $1200+

I have never seen a fake carbon fibre bonnet as there is no plant i know of capable of dipping such a large object nor would it be of any financial gain to do so.

I think you mean or what you should mean is this.

Carbon fibre bonnets purchased under $1000 are usually fibre glass based with the top layer being carbon fibre.

You get the look but not the structural advantages that you do with a complete carbon bonnet.

This is much cheaper and what most cheap Carbon Fibre bonnet makers do.

It is still "real" carbon fibre.

I have never seen a fake carbon fibre bonnet as there is no plant i know of capable of dipping such a large object nor would it be of any financial gain to do so.

I think you mean or what you should mean is this.

Carbon fibre bonnets purchased under $1000 are usually fibre glass based with the top layer being carbon fibre.

You get the look but not the structural advantages that you do with a complete carbon bonnet.

This is much cheaper and what most cheap Carbon Fibre bonnet makers do.

It is still "real" carbon fibre.

totally different car here but the last quote I had for a real on e was excess of 2.5k full CF.

totally different car here but the last quote I had for a real on e was excess of 2.5k full CF.

Eastbear, Stout, Jun full carbon fibre bonnets are around $850-1300 plus delivery from Japan.

Its just unfortunate that delivery costs so much :P

Also when a full carbon bonnet has been made within Australia and has been crash tested this will see a large increase in price.

Eastbear, Stout, Jun full carbon fibre bonnets are around $850-1300 plus delivery from Japan.

Its just unfortunate that delivery costs so much :glare:

Also when a full carbon bonnet has been made within Australia and has been crash tested this will see a large increase in price.

Been done Aaron, Custom Carbon has bonnets last I knew with ADR Stamp for approval if I remember correct

CUSTOMCARBON.COM.AU

post-146-1168421904.jpgpost-146-1168422286.jpg

Been done Aaron, Custom Carbon has bonnets last I knew with ADR Stamp for approval if I remember correct

CUSTOMCARBON.COM.AU

post-146-1168421904.jpgpost-146-1168422286.jpg

yep and thats who quoted me on the one for my 2006 holden combo..

Just out of interest I got pulled over today and fined for not having a mod plate for the pod and micrrotech ecu $75 no points BUT he made no mention at all about my carbon over fibreglass bonnet but then again I didnt ask either lol

Just out of interest I got pulled over today and fined for not having a mod plate for the pod and micrrotech ecu $75 no points BUT he made no mention at all about my carbon over fibreglass bonnet but then again I didnt ask either lol

WOW Terry your pod is secured... Yeah...

How did they get you on the ECU??? How did they even know???

Pod is secure, I have a handset for the microtech and he knew what it was, to be clear on this it wasnt a defect, it says on the fine "drive vehicle if equipment does not comply with the vehicle standards" (word for word there) offense details "pod airfilter, aftermarket computer" I'm not too concerned but the gist of it was, I didnt have a mod plate for anything and he wants me to get one to comply with the law, he could of defected the car but let me off with this as a warning. I have a feeling he just wanted to look at the car and then started telling me about his RX3 with a microtech and all the shit he went through with it even tho he is a cop lol. The reason he pulled me over was, I was be tailed by this total f**kwit who was tailgaiting me for ages and when I got to an intersection, I blasted through it to leave him behind, he was somewhere close and heard the roar and blow off.

i knew that mr-toy i just made the post cause ive seen a few ppl around wanting c/f bonnets cheap...i thought that was cheap

2 yrs ago mine cost me $800 in Hong Kong, it cost $3-400 to import.

why bother paying that much for something that you can only use on the track but i dont have a car so thats just my opinion

My bonnet had a acid rain look to it and a good respray was quoted at $750, this way I get a spare bonnet and no respray hassles, straight up bolt on all I had to do was switch the water spray nozzles.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...