Jump to content
SAU Community

Recommended Posts

  • Replies 81
  • Created
  • Last Reply

Top Posters In This Topic

Yup.

I have 2 buckets in 2 corners of my shower - when full, these water my tomato plants.

When doing the dishes, I collect the water while im waiting for the hot stuff in a jug and that waters the roses.

I dont leave the tap running while I brush my teeth.

If you dont have one, install a toilet with a dual flush system - and always use the 1/2 flush (unless you need to use the big flush).

Also have a connector thingy and a long hose, so that when the washing machine drains it goes out onto the garden, instead of down the drain.

Quick showers.

Wash with a full load - be it clothes, dishes, etc - dont waste water on just 1/2 a load.

I see little point to be honest.

When household water useage only accounts for a very small percentage of overall water use, and even smaller propotion is wasted water, its just a typical case of the Gov't looking as if they are "doing" something.

The real water wasting comes from Commerce & Industry ectors at a much higher waste and useage rate than the common household.

If you do some reasearch into the wasteage going on up in the irrigation areas up near the murray, BILLIONS of litres are lost each year because the Gov't does not deem it "cost effective" to pipe the open channels.

Now... IMO, cost should not matter at all, because once a dam is dry, its dry. Then the REAL cost will be felt

The Gov't quotes figures of around 700-1000ltrs a day for a household use.

With two people in this house, we wouldnt even come half way close to that. Fair enough a house with 2 Adults and 2 kids would... but two blokes, no chance.

nobody's gonna stop my 20 minute showers... you hear me... NOBODY!!

PS errr... why go nude just to piss in your backyard? surely just unzipping is enough

I cbf getting dressed for a morning wee... the grass is hating it though, those yellow patches are slowly taking over...

I see little point to be honest.

When household water useage only accounts for a very small percentage of overall water use, and even less of that propotion is wated water, its just a typical case of the Gov't looking as if they are "doing" something.

The real water wasting comes from Commerce & Industry sections at a much higher wasteage rate and useage rate than the common household.

If you do some reasearch into the wasteage going on up in the irrigation areas up near the murray, BILLIONS of litres are lost each year because the Gov't does not deem it "cost effective" to pipe the open channels.

Now... IMO, cost should not matter at all, because once a dam is dry, its dry. Then the REAL cost will be felt

The Gov't quotes figures of around 700-1000ltrs a day for a household use.

With two people in this house, we wouldnt even come half way close to that. Fair enough a house with 2 Adults and 2 kids would... but two blokes, no chance.

Very true. Commerical water saving is where its at!

BTW wtf is John Howard thinking of using Nuclear Power?? Does he know how many thousands of litres of water a day the nuclear reactors need for cooling????????? In Europe and America yes, they have plenty of water, but not in Australia... at least not the south part.

nobody's gonna stop my 20 minute showers... you hear me... NOBODY!!

PS errr... why go nude just to piss in your backyard? surely just unzipping is enough

right on!

never been in the shower for any less than 20mins. i once stayed in there for 45mins :O but it was a very cold night with very hot water on :P

Edited by R-SPEC
I see little point to be honest.

When household water useage only accounts for a very small percentage of overall water use, and even smaller propotion is wasted water, its just a typical case of the Gov't looking as if they are "doing" something.

The real water wasting comes from Commerce & Industry ectors at a much higher waste and useage rate than the common household.

If you do some reasearch into the wasteage going on up in the irrigation areas up near the murray, BILLIONS of litres are lost each year because the Gov't does not deem it "cost effective" to pipe the open channels.

Now... IMO, cost should not matter at all, because once a dam is dry, its dry. Then the REAL cost will be felt

The Gov't quotes figures of around 700-1000ltrs a day for a household use.

With two people in this house, we wouldnt even come half way close to that. Fair enough a house with 2 Adults and 2 kids would... but two blokes, no chance.

also when i worked on the council,if there was a major leak somewhere we would turn on fire hidgrents<spelling<and leave them over night or even more.was a massive waste of water...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't think the shuffle can damage the turbos. It only happens at low shaft speeds and loads. It's just annoying (to some people - others are tickled by the effect) and it quite possibly reduces spool performance a little bit.
    • Oh dear. The panel beating needs to be done before the filler work. Do you have a photo of the dent before you started? Hard enough to not flex and only hit the high spots?  What do you mean it was just temporary? 
    • Can u check this way it works for power supply?
    • These coils draw 10amps that what i read online
    • I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
×
×
  • Create New...