R34 N1 Onto R32

[gexenon]

Hi,

I recieved my R34 N1s and they didn't come with any oil lines. I'll be bolting them onto a R32 GTR. Does anyone know what additional parts i would need?

[GTRsean]

switch oil lines over.......

[Angus Smart]

question about your n1's.. aa403's?

[gexenon]

question about your n1's.. aa403's?

Yep, AA403

[gexenon]

So i don't need any new lines, just swtich them over and its done. From what i understand, these are pretty much bolt on ain't they. I'm going to get my machnic to do this but i just want to make sure that all the aprts are avaliable for the job.

[Angus Smart]

they look like they are direct bolt on, but mine were always on the car.

[gexenon]

they look like they are direct bolt on, but mine were always on the car.

So i can use the same lines and everything?

[gexenon]

How much boost are you running? is it on a stock engine?

[Angus Smart]

i made 410hprw last time on around 22 pound, i have n1 piston's cams and unknown rest of motor.

dont quote me on same lines but they do appear to be a straight swap.. hopefully someone else can clear that up

Edited January 15, 2007 by Angus Smart

[wrxhoon]

They will bolt on , just use your old lines and new gaskets and copper washers on the lines . If they dont come with actuators you can use yours as well but the N1's are ajustable, like these.

[gexenon]

i got the actuators. Sweet, so its a easy off and on job then.

[wrxhoon]

i got the actuators. Sweet, so its a easy off and on job then.

Easy....hmmmmm... I didn't say easy , depends who is doing it . Someone that knows what they are doing, should do it in 4 -6 hours depending on what goes wrong, its a tight fit in there ...No mods needed though, direct fit .

[Adriano]

Are you upgrading the dump pipes/manifolds at the same time?

[Angus Smart]

Are you upgrading the dump pipes/manifolds at the same time?

this man is on the money!

[gun32gtr]

nothing wrong with stock manifolds.but dumps is a must.

im just doing the gt2860r with justjap dumps now..wouldnt say its easy but if ya just keep relaxed when doing it,all will be fine

[gun32gtr]

also some stumpy rachet spanners will be your freind

[gexenon]

Yep, i've got some trust extension pipes to go on at the same time. Thought i might as well do this all at the same time

i've also got bosch 044, power fc and JB clutch.

My machanic knows GTRs inside and out, its eric from hypertech. He worked on the winfield car

His also doing the tune.

Whats a safe level to aim for with standard injectors?

Are you upgrading the dump pipes/manifolds at the same time?

[gun32gtr]

heard about 260kw-280kw maybe.correct me if im wrong...

[Ronin 09]

sorry i missed your call dude...

injectors should be OK up to 270rwkW (ish)

[shanef]

ull need different water lines to ur R32 ones. when i dummy fitted my N1's (AA-403 same as urs) both the water lines didnt line up.