Jump to content
SAU Community

Recommended Posts

Sorry guys, i don't have a photo but i saw a white R34 coupe at Macca's Nunawading on Sunday morning that had a flush boot spoiler (no posts) that protruded about 100mm past the boot. Was wondering if anyone new what it could be and if they had any pics of it. Thanks heaps.

Link to comment
https://www.sau.com.au/forums/topic/151821-which-r34-spoiler-is-this/
Share on other sites

Just wondering about the legality of that, it looks nice though,

Provided you still have a 3rd brake light (which i think is mounted in the boot lid on a 34 >_< ) that wing would be legal, as it looks to be completely made from fibre glass, even the supports.

Provided you still have a 3rd brake light (which i think is mounted in the boot lid on a 34 >_< ) that wing would be legal, as it looks to be completely made from fibre glass, even the supports.

nah al, any part that protrudes beyond factory bodywork is illegal...

eg where a "T" style wing protrudes either side of the bodywork it is illegal.

there used to be all the regulations on the vicroads website, but the buggers have taken them off or I can't find them anymore.

nah al, any part that protrudes beyond factory bodywork is illegal...

eg where a "T" style wing protrudes either side of the bodywork it is illegal.

there used to be all the regulations on the vicroads website, but the buggers have taken them off or I can't find them anymore.

Don't forget the gaurds buldge out. My wing sits in a similar manner, but is still within the width of the guards, near the wheels.

Judging from that pic alone, i still say it may be legal.

PS: I know mine is illegal, as it is fully aluminium :)

post-1811-1168867091.jpg

From memory, the tomei drag car (the yellow 1 that was stolen) has a spoiler similar to that....thats just going from memory, so i'll try and find a pic to make sure I didn't dream it up

Edit: Nope, doesn't have 1... my mistake

Is this it?

toprpm_219.jpg

toprpm_211.jpg

It was like the sedan one but protruded back further, never seen one on these forums.

Hey,

Any ideas for other places to get that sort of lip picture cause thats the one I am looking for... Only seen it on a standard R34 2000 model GT.

Drew.

From memory, the tomei drag car (the yellow 1 that was stolen) has a spoiler similar to that....thats just going from memory, so i'll try and find a pic to make sure I didn't dream it up

Edit: Nope, doesn't have 1... my mistake

Is this it?

toprpm_219.jpg

toprpm_211.jpg

I was on the other side of the road as it drove past, think that could be it although it was all white and not sure if it had the separate wing at the back but then again maybe it did. Thanks heaps for your help.

Hey,

Any ideas for other places to get that sort of lip picture cause thats the one I am looking for... Only seen it on a standard R34 2000 model GT.

Drew.

Yep, Powerplay has this one but seems to defeat the purpose as the S2 R34 boot spoiler totally covered the factory boot brake light (cos it rusts) and this one has a hole in it to expose the factory brake light.

post-26384-1168938854.jpg

Yep, Powerplay has this one but seems to defeat the purpose as the S2 R34 boot spoiler totally covered the factory boot brake light (cos it rusts) and this one has a hole in it to expose the factory brake light.

Wonder if it will fit series 1 then? Cause I already have the break light but it is lower down. I like the rear bar on that sedan wish I could get mine to look like that, thats the only thing i tend not to like on the sedan is the blinkers nad reversing lights i like the way the coupe has em setup way better.

Wonder if it will fit series 1 then? Cause I already have the break light but it is lower down. I like the rear bar on that sedan wish I could get mine to look like that, thats the only thing i tend not to like on the sedan is the blinkers nad reversing lights i like the way the coupe has em setup way better.

There was one of those rear bars on E-bay for a few weeks, only wanted $170 for it and it was new.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...