Jump to content
SAU Community

Recommended Posts

hey guys,

just wondering if anyone has had success fitting a GReddy intercooler kit with a type m front bar (r33),

ive been looking at the bar and it looks like a fair piece of the center section will need to be removed for the intercooler to receive enough air. (i can't recall the excact specs of the coolers size as im picking it up in a couple of days, but i know it's pretty big lol)

cheers.

Link to comment
https://www.sau.com.au/forums/topic/152009-greddy-intercooler-kit/
Share on other sites

Yep I've installed the Greddy FMIC into a S2 R33, you will need to cut the end of the chassis rail a little and the fins from the middle of the front bar...

Check out images, I am going to take my front bar off again and cut the bar a bit more so I can fit in some black mesh to protect and hide the IC.

oh yeah you also need to cut into the wall of the engine bay for piping. A metal hole saw does it easy I finished it off with some u channel rubber to cover the edge of the metal. And you can probably still use the stock washer bottle instead of the smaller greddy one...

Edited by 75coupe
Yep I've installed the Greddy FMIC into a S2 R33, you will need to cut the end of the chassis rail a little and the fins from the middle of the front bar...

Check out images, I am going to take my front bar off again and cut the bar a bit more so I can fit in some black mesh to protect and hide the IC.

oh yeah you also need to cut into the wall of the engine bay for piping. A metal hole saw does it easy I finished it off with some u channel rubber to cover the edge of the metal. And you can probably still use the stock washer bottle instead of the smaller greddy one...

hey 75coupe, thanks for the info, looks like a nice, snug fit.Nice rims too.

What are the dimensions of the GReddy fmic?

I have fitted a fmic, measuring 600x300x76, but did not need to tough the chasis rails; i am a little concerned that you are willing to cut into the rails :yes:

Anyway, on a S1 you will need to remove the centre part of the reo, but keep everything else (ie: top support and the actual supports that slide onto the rails). I cut out the middle part of the bar, to allow more airflow to the fmic. I then got the cut-out holes plastic welded, to make it look neat and factory, this also requires you to paint the bar.

post-1811-1168950840.jpg post-1811-1168950885.jpg post-1811-1168950903.jpg post-1811-1168950640.jpg post-1811-1168950788.jpg

"i am a little concerned that you are willing to cut into the rails"

you are only cutting a small bit off the end definitely nothing structural...

it even shows you in the greddy instructions to do it...

"i am a little concerned that you are willing to cut into the rails"

you are only cutting a small bit off the end definitely nothing structural...

it even shows you in the greddy instructions to do it...

if ur in vic and get defected...u will wish u didn't.

I have fitted the same size cooler and had to do the same as Al...he is on the money.

hmmm, well I sorta thought no one would notice the rear tyre width, i kinda digitally edited them a little larger oops maybe alittle too much but it looks cool. I only run 265s on back

All the the graphics are real though...

The piece I cut of the end of the chassis rail was like 1/2 an inch if that, tiny.... no one would even notice it... definitely not affe3ct strength as it didn't even complete the square tube if ya know what I mean

hmmm, well I sorta thought no one would notice the rear tyre width, i kinda digitally edited them a little larger oops maybe alittle too much but it looks cool. I only run 265s on back

All the the graphics are real though...

The piece I cut of the end of the chassis rail was like 1/2 an inch if that, tiny.... no one would even notice it... definitely not affe3ct strength as it didn't even complete the square tube if ya know what I mean

265 is still wide enough man. dont be shy, ur still big enough.

What about ya front blinkers, are they edited?? If not, did you do that yourself?

I have seen clear indicators around for the S2 indicators but this image has been doctored...

If you can get the fog light lens's and just replace the orange lens and use an orange globe instead.... it's just hard to locate the lens by itself... if anyone knows where to get em that would be cool...

you can always just use some tint in a can to make them different to the fogs...

Al, your rims are mint, what are they? how much they set you back? if you dont mind me askin :D

Thanks buddy!

They are cheapy rims :w00t: Lenso Muse 19 x 8, custom powder coated to the charcol colour.

Bought rims about 4+yrs ago, at that time the costed me $3600 with tyres (Hankook K104). Got a pretty good deal, considering 19's weren't as popular then as they are now.

These rims can be found for about $1200 second hand, i've seen them for sale here (sau) numerous times, so keep an eye out.

75coupe: Sorry to inadvertantly catch you out :), just looked soooo tough.

Here is a pic of my car with 335 tyres fitted, and it is not a photo chop :)

I like to call it: Tonka Spec

post-1811-1169031078.jpg post-1811-1169031003.jpg

Those rims belong to my mate's car:

post-1811-1169031179.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...