Jump to content
SAU Community

Recommended Posts

I know it's not very exciting for you guys but I thought I'd post it anyhow.

I achieved a new fastest ET today at 13.330 @ 104.22mph.

That is in full street trim incl. normal tyre pressure, spare in, sub-box etc in, 3/4 tank of fuel, no fuel additives & normal street tyres (not even semi-slicks). Just set up as my normal daily driver.

For your perusal:

Link to comment
https://www.sau.com.au/forums/topic/15247-s15-pb-this-afternoon/
Share on other sites

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Very nice Andy! Soon to see 12's mate.

OK time to spill the beans Matt/Pawley!!! What is this new white 32!? Let me guess it's a 32 GTS-t with RB26 power? Regardless of what it is - how quick did Terry/JMS get it down the 1/4?

Oh & how did Ben go? (Yellow RPM Supra)

shit sorry you're right MattR - stupid me .... that timeslip was actually against MattR's current morone R32 (= plenty of wheel spin) .... my actual run against the Supra was :

13.345 @ 104.38mph

vs black (stock) TT Supra (not the RPM one)

14.622 @ 102.31mph

:P

Cmon MattR .... tell the boys what you're pretty new beast ran - I'm not gonna kiss and tell either!

Thats not boring at all nighty! very good result & worth all the effort & waiting around. 13.3 is pretty good when you consider that I ran 13.1 in Big Paul's black R34 GTR @ 106mph (car worth

$100,000+) & 13.4 @ 105 in EVO 7 (car worth $80,000+) also

both these cars are 4WD so have traction advantage.

Only a couple of tenths/mph behind them - I'd say you are onto a good thing.Keep up the good work.

C'mon MattR - where are you - tell the good people what up with your new car. Whatsisname, it's an R33 rb25det in an R32 GTSt.

AND, yesterday it pulled a **.** @ *** mph.

John,

Yeah I've already managed to piece together almost all of the details on MattR's new car :D

308rwkw @ 1.4bar (dropping to 1.2bar) TD06 RB25DET in a white R32 GTS-t with multiple fancy bits already fitted (including the 25DET & R33 g/box).

The only bit I haven't already read elsewhere on the forums is the 1X.XX @ XXXmph bit :)

The "best" way to make a R32 GTS-t seriously quick - stick an RB25DET in it. Relax everyone I'm just j/king (sort of) :)

SO you mean it has these goodies as per JMS webpage?

"250-300kw R32 GTS-T with modified RB25DET, GTR Rear, R33 G/Box, Trust TD-06 Turbo, GTR Body Kit, R33 Brakes, New OS Twin Plate Clutch, Apex Cooler etc"

Beans hav been spilt. The tension was killing me..

Dont be shy matt... what'd she run

White 32 308kw at thewheels at 1.2bar. 11.317 at 122.36mph.

The engine is a RB25det out of a 98 skyline same as the gearbox. Its got a tdo6 550cc injectors Mick made the plenum (the same as what was on his sub zero car) It has got a custom one piece tailshaft instead of the two piece. The whole rear cradle is out of a 32gtr. Its running microtech computer complete with hand controller and turbosmart boost duel boost controller.

I think I will have a big problen with traction, Ill have to run 540s all the time I think. Hope this helps. Ill have it at the morpowa dyno day

What an upgrade Matt! Well done :D

11.317 @ 122.36 is flying! I think that puts the car very close to, if not on top, in the HPI drag list for RWD over 2400cc!?

Matty Lowth ran his ~320rwkw RB30DET GTS25t a few days back. 12.3 @ 123+mph (2.3 60ft & slipping clutch) The mph on both Matt's cars is very close!

I think it is on top of the list. Ill give it a good run on the 31st and see what I can do there. The 60' was 1.670, 330' was 4.746, 660' was 7.288 @ 96.09mph, and the 1000' was 9.476.

The reaction time was a bit slow at .798. Its just a pity I wasent driving it. All my r/t's have been between .4 And .5 in my old car

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
×
×
  • Create New...