Jump to content
SAU Community

Recommended Posts

  • Replies 74
  • Created
  • Last Reply

Top Posters In This Topic

Sorry guys,let me clarify.On a post on page 2 I said that I had a dyno run with no lid,that was with bonnet up.Obviously that would make a big difference in temps.But the run with 2kws less was with bonnet closed.So the setup really isn`t to bad.Three inch pipe from old cooler hole to underside of snorkel.Clamp both ends using pvc pipe connectors.Then cut small hole in front of lid facing headlight about 1'' by 3".Yes I know it isn`t perfect due to a little under bonnet temps but it does get me close to no lid at all.

Why dont u create the vent in the bonnet so it is designed that the air enters the bottom of the car and exits the vent. thats how its all supposed to work. you dont stick a vent over the pod. therefore rain wont be in issue unless u are driving 80km/h in reverse for it to be going into ur pod.

My brother has a cf bonnet on his Supra (TRD style) that has vents over where his pod sits and it comes with plastic inserts that you can stick in to block the vents off if it rains. You just need to remember to put them in! (he forgot once, bad move!)

  • 1 month later...

Exactly what I did but put a flexable tube from from old cooler hole in guard to underside of snorkel between the curve of the cooler pipe and the air box.To make up for lost intake width.

Exactly what I did but put a flexable tube from from old cooler hole in guard to underside of snorkel between the curve of the cooler pipe and the air box.To make up for lost intake width.

i just used the radiator air deflector with scoop to compensate

I was under the impression in vic that the epa laws state "must be a standard and un-modified air box" if you have a fmic that is...

but like dezz said if your car has a standard fmic then a pod is ok to have...

but as for the topic i do agree with the factors involved with a air box without a lid, it'll be the same concept as having a pod.. hot air from engine bay...

i'm in the process of having different intercooler pipes made to go around the air box guide.. (i wish i baught a intercooler that used the standard holes lol)

but you live and learn :)

  • 2 months later...

Hey EGA41T - I see your pipe that comes over the radiatorhas a nice bend back downwards after going over the radiator fan. Mine heads upwards and doesn't come back down - hitting the bonnet a little.

Because yours bends back down it means you didnt have to take quite as much out of your snorkel. Did your pipe come like that or did you get the pipe bent afterwards?

Cheers

- mine is a justjap kit..

Hey EGA41T - I see your pipe that comes over the radiator has a nice bend back downwards after going over the radiator fan. Mine heads upwards and doesn't come back down - hitting the bonnet a little.

Because yours bends back down it means you didnt have to take quite as much out of your snorkel. Did your pipe come like that or did you get the pipe bent afterwards?

Cheers

- mine is a justjap kit..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...