Jump to content
SAU Community

Recommended Posts

What if I don't want to unplug the battery lead?

it's far easier than shorting out your wiring harness, causing a fire, and watching your pride and joy burn to the ground.

ok maybe i'm exaggerating, but seriously.. taking the battery terminal off is by far the easiest way.

I personally do not feel comfortable wiht the shorting the pin method, because I have not read that in any of my nissan manuals (someone correct me if I'm wrong, because the indexing of the manuals is very bad).

Disconnecting the battery seems to work sometimes if it's disconnected for a long period of time but I hate losing my radio stations.

Nowadays, I just use my laptop to do it. I can reset the ecu and clear the self learn.

correct me if i'm wrong....and i know this is a long standing debate...but resetting the ecu does sweet fuuck all....apart from clearing your error codes.

the ecu learns everytime the car is switch back on. it doesnt have the capacity for long term memory of the parameters you're hoping to 're-learn'.

ive been told this by tuners, and other ppl who have technical knowledge of ecu's. and it makes total sense.

why would the ecu restrict its ability to adapt to new situations, and only work at its best when ppl with 'supposedly' inside information decide to disconnect their battery.

ive tried it, made no difference at all.

It made a difference to my car..

How?

Well it doesnt run as rich anymore..

It doesnt smell as much of exhaust fumes due to the car not running as rich..

The car actually felt a lot better once it was reset..

For me it worked. Gettin more milage.

----

Remember to dc the alarm.. Otherwise you gonna go deaf like me lol when you dc the battery..

And yup your headunit settings will be reset.

I thought the wires to be shorted were on the ecu, not the fuse box.

Resetting mine didn't do anything either.. Wouldn't the ecu just be set up to react to current environments and not remember the way the weather and your driving has been for the last 6 months.. That seem's the logical way to set it up to me :(

BTW, can I use nissan data scan to reset the ecu?

Reading here: http://202.43.226.57/

Last item on point 4 "clear self learn", that is the one isn't it?

(maybe I'll build one and have more fun with the car :stupid: )

i thought that the ecu would adjust itself to new mods quicker if you clear it, as it would adjust in large increments when first trying to learn, then smaller and smaller as it gets closer to optimum. when you change something tho, it has to use these tiny increments to get to the new optimum running...

so reset it and it starts off big again

thats my lil story :(

I don't know about data scan. Its not my favourite consult software. My software can result the ecu itself as well as the self learn.

What are you using dude? At the moment I'm using ECU Talk, but I'm interested in whatever does the best job.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...