Jump to content
SAU Community

Recommended Posts

  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...

Finally got my right and left rotors for the rear on Monday and as luck would have it I had an early day care of the wet conditions so I got to fit them today. So now I have the dba 4000 series slotted rotors front and rear. Very cool. I have put the bendix ultimates front and rear as I said before I was running out of money so they were a cheaper option. No performance complaints yet, but then I have been bedding them in so no real chance to test them out. But I will say they are the dustiest pad by far that I have ever used. Not happy about that.

Guest Boxhead

im not sure how far that is from you, but on wednesday me and a mate went to noosa, we filled the tank up at yatala, and got there, drove around a little, and back to my house at tweed heads without needing more fuel... about 550kms i think... thats before fuel light came on

hey all just thought i make a start, i dont think ill ever be finished with my car. I got my r33 gts NA last august and it came bog stock with a HKS Super Drager Exaust and slightly lowered. The next thing to do wwas put the stereo in out of my old car. I then purchased some 17 inch chromies about a month later. Soon after that in went the subs with a basic but still custom install. As i save a bit more money i got both doors and all quarter panels resprayed. Then we were renovating the house and the front gate fell on it putting a hole in the front left quarter panel and bonnet. So back to the panel beaters it went. I soon installed some neons and other interior stuff like EL guages momo wheel and knob.

A little closer to the end of last year mum backed into it so back to the panel beaters again for a front bumper respray and GTR style front grille. I then got my licence in January, only to re end someone 3 days later as some **** WIT cut her off but oh well, if u run up someones arse its ur falt end of story :). I then got a boot lip style spoiler. In the last month i have completely re made my boot, which is now no longer a boot. I got it back today from the body shop with a brand new kit and some extractors and an Apexi S-AFC ii is going on in the next 2 weeks. I now have to save very hard to do a 5 stud hub conversion and put some 18's or 19's on it as the kit makes my 17's look like golf buggy wheels.

  • 2 weeks later...
  • 8 months later...

Thought I might revive this thread, used to be quite good.

Since I last posted here the only addition to the GTST has been an oil-catch can.

I have just added to the garage a R33 V-spec GTR

Mods to date:-

HKS type 1 turbo timer

Tint

Nismo fuel/oil/radiator cap

BBS rims 18"x9.5"

Yokohama 265/35 R18 ES100 x4

Nismo Clear indicators

Alarm/immobiliser

Nismo GT gear knob

Otherwise stock for the moment.

OK well I have spent a truck load since I bought my GTR last October & all those that know me will vouch that I've driven it about a dozen times since.... Here's a list of mods/repairs:

Motec M800 ECU

Motec Boost Controller

2 reconditioned High Flowed R33 GTR Turbo's (blew them both)

Replaced all the oil feed lines & tubes

Installed new oil filter housing gasket (none there!!!!) & inlet manifold gaskets

Replaced all plugs/leads

Reground cams

Replaced timing belt

New tyres

Adapters (spacers)

Clarion Headunit & Pioneer Speakers

New exhaust, one with a cat converter....

and on & on she goes......

Anyways one step closer

Cam :D

meh.. i'm just getting to the point where unless i have a stupidly fast car that has 300rwkw+ i cbf modifying anymore as it costs too much :D what i want to do would cost $10k - I don't have $10k so i sit on my hands.

Thought I might revive this thread, used to be quite good.

Hmm! Been running on default PFC tune for ages and now on default Data-Logic tune....a little better but not much.

thinks.....MUST get this thing tuned up!!!

Changed a few things lately. Got a 400R kit but didn't like it . Now in the process of getting a full on Carbon Fibre kit from Custom Carbon will be Bonnet, bootlid, front and rear bars and maybe sideskirts.

Power FC with Data-Logic has replaced the EMS DuelSport

Full Apexi Supersuction Pod kit

Bigger FMIC

Front throttlebody Plenum

E-Boost has replaced Audi DIY

HKS 2540 Turbo

Moved Washer reservoir to boot

Oil cooler with Thermostat and remote filter in the mail

other mods remaining are

Full adjustable Whiteline/DMS coilovers

Whiteline adjustable suspension bits and pieces

Pineapples....set for drag

3" Turbo back exhaust twin 3" tips

Nismo twinplate clutch/6Kg flywheel

HKS adjust. camwheel...exhaust

C's short shifter

Recaro Seat

Full harness seatbelt

Apexi RSM/G meter

Apexi Boost gauge

Nismo GTR Dash panel

Weds 18x8&9 and Mod 11 17x81/2&91/2 wheels

Lastly...but not leastly...Blue neons in boot and glovebox :D.....ok..ok..so i'm a rice boy at heart. :wavey:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Do they always do it from the AFM? If so... You know what I'm already thinking I reckon...
    • The other problem is that the pan is on an exchange basis, which would be a pain to have to send original sump to Oz for the work to be done. Would ideally need to be able to pay for a locally sourced core. To that end - I'd just fabricate one outright.
    • Not at all, pure street use, touge, even drag strip and you'll be fine   There's a larger version of it too, however would be overkill for your application. If you do plan on using that sump, might as well fit a headdrain/crank case vent to help alleviate crank case pressure. Your mechanic will also notice you cannot re-use the AWD windage trays on the motor too, as it fouls with the AWD -> RWD sump. However given your usage, you'll be fine.
    • @GTSBoy yeah but the MAIN problem is that "you" guys may know that but i/my mechanic did not. I literally spend hours to find differences between Stagea and Skyline engine (even here) and found kinda "nothing" Yeah one guy mentioned that the block is larger/wider but nothing about the oil pan. Of course AWD has different one but "everybody" says...yeah just slap RWD pan... and the parts number for my N/A engine and NEO DET were the same so iam using one from my old engine. And of course being in EU/Czech many of the sites did not even show(i need VPN to be here)... @MBS206NO it is not my channel and not my video. Dont even know the guy. I just post this as a reference cuz i have the same problem. As i said you guys in AU/NZD may know this but here it is kinda a new info cuz IF someone doing this swap they already have oil pan or they make custom one.  @Dose Pipe Sutututu Yeah it is AWD RB25DET NEO Yeah as you mentioned the pick up is in a different place ...but i do not drift or track the car. It is and will be strictly street and just "casual" weekend cruiser. With that "custom" pan as shown in the video...could there be some problems?  For others. Iam sorry if that topic "looks" like i want to show/boost some YT channel or numbers. Iam quite the opposite.  I would rather drive my car thru sewers than get the attention that this car gets here. I do not have any YT channel nor IG/Twitter or TikTok. I just want some info from time to time cuz here...there is none :-) 
    • +2 Mine came with a bonus flat battery. 
×
×
  • Create New...