Jump to content
SAU Community

Recommended Posts

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

Originally posted by justified2.4

I am interested in the Mines or the Power FC if you still have them, email me: [email protected] or AIM: JCAP Tuning

Thanks.

check your e-mail

  • 2 months later...
Originally posted by tridentt150v

By the way, I did look at your car once, when you were selling it [the white gtst].  

I'll be away today.

See your PM

I think you've got my car confused with another, cause mine was silver.

anyway the cluster i have is normal GTST cluster with a Nismo 300km/h Speedo in it. $475

and I also have a standard R33 GTR cluster (fits a GTST) for $300.

I will only sell the cluster as a whole I will not seperate the individual meters.

Originally posted by heifongliu

Hei,  got a mate who may be interested in The MINES ECU,  how much would you go for it .. i live in sydney .., does it have hand controller .. what' the model no .. and the conditions. ..Thanks

The Mines ECU does not have a hand controller. the power fc has a hand controller

What are the mileages on the GTR and GTSt clusters, could you send a jpg to me of each one.

I'd like to talk to you about these. The price is not an issue, just want the best one.

Danny.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...