Jump to content
SAU Community

Recommended Posts

  • Replies 701
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Looks like 15 slots left.

Guy & gals - this will be a great track day. All SAUer and lots of noobs. Don't be stressed about being too slow (that will be me). Lots of good guys to show you the lines. I understand Wakie is wide open so minimal walls to hit even is you do get a bit out of shape. You will walk away wanting more and if you show up to watch you'll regret not driving. You even get a shirt out of it! If you have ever wondered what your car can do this is the time and place to find out...

mate its gunna be mad cant wait been there once in my old 1980 corolla and my times were better than a couple of prb's i was suprised but there is one corner thats gunna be a problem because its real bumpy and my car is pretty stiff unless they have resurfaced it since i was there.

umm well kind of....they have resurfaced the last turn which takes some of the challenge out of the braking zone. But the rest of the track is still as it always was....pretty bumpy compared to say eastern creek

Ok ladies the GTR is coming out for one romp, and I will be bringing the new owner. I can say nothing more until I have my deposit.

Adam save me a spot I will transfer the cash on Monday

Stand back ladies this is going to be a blast!!!!!!!!

Ok ladies the GTR is coming out for one romp, and I will be bringing the new owner. I can say nothing more until I have my deposit.

Adam save me a spot I will transfer the cash on Monday

Stand back ladies this is going to be a blast!!!!!!!!

Someone just bot a great car and driving lesson - how good is that!




  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...