Jump to content
SAU Community

Recommended Posts

Hey rb30det guys, is it possible to bore out the rb25 block and use rb30 rods and pistons to make an rb30det?

It has been done.

It requires modification of the rb30 crank (destroke), rb25/26 rods and custom pistons.

All though not optimal as the rods would experience greater side load and the piston pin height is bugger all.

But it has been done and appears to work well. I believe the bloke made some where up around 400rwkw and had 8000rpm on board. I'm curious as to how well its holding together some months down the track.

The bloke who did it I believe is mark99. He's in Adelaide.

Hey guys I'm building up a rb30det, I'm ready to start bolting it together just need a head gasket and an oil pump.

What head gasket do you guys recomend, How much and where can i get it? I was looking at a Cometic 1.2 mm metal on this site on a traders forum but now i cant find it again :laugh:

And whats the diferance between the GTR and GTR N1 oil pumps? Is it worth spending a little extra on the N1 pump and why? Also where can i buy one i been told $410 from this site?

Hey guys I'm building up a rb30det, I'm ready to start bolting it together just need a head gasket and an oil pump.

What head gasket do you guys recomend, How much and where can i get it? I was looking at a Cometic 1.2 mm metal on this site on a traders forum but now i cant find it again :D

And whats the diferance between the GTR and GTR N1 oil pumps? Is it worth spending a little extra on the N1 pump and why? Also where can i buy one i been told $410 from this site?

N1 pumps for $410

here - http://www.skylinesaustralia.com/forums/in...howtopic=133537

cometic gaskets

here - http://www.skylinesaustralia.com/forums/in...=131709&hl=

We blew our rb30det :sick: Im pretty confident the n1 oil pump has either rattled apart or the gear has cracked. Will know later in the week when its all pulled down. Its a sad sad day, hopefully its not as bad as it sounds, but she is ceased up completely so im expecting it to be almost totally screwed.

We blew our rb30det :sick: Im pretty confident the n1 oil pump has either rattled apart or the gear has cracked. Will know later in the week when its all pulled down. Its a sad sad day, hopefully its not as bad as it sounds, but she is ceased up completely so im expecting it to be almost totally screwed.

ouch, ouch, ouch... really sorry to hear that. :sick: Plus it makes me nervous...

Very interested to hear if its related to N1 breakage...

I dont know at the moment....Depends on what caused it. But either a brand name one or perhaps a dry sump setup which would be nice. Saturday was the most expensive day of racing weve had so far haha.

How many k's had it done?

I'm fairly nervous with my pump.

No crank collar and its clocked up some where around ~45000km's.

I went the std rb25det pump as I remember at the time my thinking was the N1 pump with its higher relief will place greater pressure on the small crank drive.

Just pure bad luck R33_racer.. :D

Are you running an ATI balancer?

yup...but our car gets thrashed more then a street car would....all day at the track its at or near the max. Yeh we are actually, thats where im lost. I made sure we took almost every precaution available to make sure this wouldnt happen. Collar, everything balanced and ati damper. But we didnt loctite the backing plate bolts in or anything like that, we just bolted it up and left it assuming it was right from factory....so i think thats our mistake unless its a fault with the pump itself.

Im not 100% sure if he does. I think i remember a thread from ages ago where he said he made his own dry sump setup from second hand bits for cheap which they ran on one of the cars. not sure if it was his or another one. Would be interesting if it was on one of the rb30dets. hopefully he will come and explain it to us :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
    • Being a manual, we very quickly ordered new R34 gearbox (From Nissan) and remaining parts from Kudos motorsports. Would highly recommend the team there. Ultra helpful and quick to share advice and upgrades. We are in the middle of taking the Auto out (Genuine 94,000/kms) and putting the Manual in this weekend. Part 2 of the build will include likely a Plazaman Intercooler and Plenium, Hks Exhaust with Tomei Dump (ordered).
×
×
  • Create New...