Jump to content
SAU Community

Recommended Posts

6762250107217153yu.jpg

What do you get when you bolt a supercharged 1,000bhp engine, hitherto found under the bonnet of a four-wheel-drive monster truck, into a home-made motorbike chassis?

Most people would probably say “trouble” or possibly “a ride in an ambulance”. But for engineer Nick Argyle, it seemed the obvious thing to do when tinkering with some bits in his garage one day.

Argyle had built his own monster truck some years previously before selling the chassis but keeping the whopping 8.2-litre Mopar V8 engine. Lacking the space to build another truck, he decided that the ideal home for the supercharged powerplant would be a two-wheeler.

Called the Rapom V8, the result is the most powerful road legal motorbike in Britain, with between 1,000 and 1,200bhp depending on the boost from the Littlefield supercharger. That makes the Bugatti Veyron, the fastest car in the world with 987bhp, look rather tame.

And if you thought your neighbour’s SUV was a gas-guzzler, the Rapom consumes a gallon of pure alcohol ever four miles. Fortunately Argyle only uses it for the 10-mile trip to his local dragstrip in the Cotswolds and then only in the daytime as the bike lacks headlights. The frame, constructed from massive, 3cm thick steel tubing, is extra long to prevent the bike flipping over under hard acceleration and as it tips the scales at 1,000lb, a reverse gear is needed for manoeuvring.

With such a surfeit of power, just two forward gears are needed in the API racing transmission. Stopping power provided by racing brakes gripped by six-piston callipers.

didnt know where this was appropriate, mods feel free to move it if need be >_<

Link to comment
https://www.sau.com.au/forums/topic/155150-thats-not-a-bike/
Share on other sites

thats the radiator not the cooler. it isn't intercooled. the supercharger runs like a drag cars. straight into the intake.

by the looks of where the handlebars are, you would almost be leaning against the back of the blower when you ride it.

I cant see the handlebars :S im sure there there but there hard to see...

also the seat sits heaps far back from the bars, stearing this would be fun...

Would not want to experience a blower Back fire...... shrapnel for breakfast. :laugh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • From the factory on RB26s there's a fitting on the intake manifold collector/"plenum" that provides pre-throttle boost signal. That's how they did it back in the day, I figure it's fine to replicate it.
    • I would be surprised if that wasn't the issue. It's probably telling you, that even if you remove the plastic liner, you may have some other clearance issues that may occur too in some scenarios. IE, tyre to guard. It looks like someone has already rolled the lip, but you may still have issues in the future IE, turning and hitting a bump etc. The fact it changes how bad it makes the noise when you are going backward vs forward is highly indicative that it's the tyre rubbing. They do make a terrible sound, even if you're only pushing a project car that has a liner hanging down on a tyre!   Has the car been lowered? If it has been, what is the measurement from the centre of the wheel hub to the lip of the guard straight up?
    • Summernats cruiser?
    • Mark's a bit smarter than people give him credit... He'd convince the person that is to become dead, to drive him to the forest first. That way his car has no evidence in it, and he's free to dispose of their vehicle permanently how he sees fit too...
    • But if you had to go bury a body in the forest, would you not put that in the boot? Most of them are >=90kg these days.
×
×
  • Create New...