Jump to content
SAU Community

Recommended Posts

hey guys, some parts i have for sale >_< most of which are taking space in my garage :)

Cusco oil catch can, bought this from japan but now dont need it, brand new still in the box (unopened) Universal so can fit most turbo and na cars

Lookin for $120 firm

http://i169.photobucket.com/albums/u210/dr.../cuscocatch.jpg

genuine greddy dual pillar gauge pod for r34 GTT. Brand new still with the box (opened it to have a look, however havent used it as ive decided i have enough gauges already) Bought it from crystal autosport factory while i was in japan. Payed 10,200 yen for it. $100 firm

http://i169.photobucket.com/albums/u210/dr...trustpillar.jpg

http://i169.photobucket.com/albums/u210/drashou/greddy2.jpg

r33 dash lying at home had it on my r33 a while ago which ive now sold. Gone over it with carbon fibre film, looks pretty cool. Also comes with auto transmission surrounding in carbon fibre aswell. Has all the buttons intact etc $50

http://i169.photobucket.com/albums/u210/drashou/dash2.jpg

http://i169.photobucket.com/albums/u210/drashou/r33dash.jpg

Blitz bov $60

http://i169.photobucket.com/albums/u210/drashou/blitzbov.jpg

Dual pillar pod with two gauges one a blitz boost gauge and the other an apexi power gauge, was on a s13 however im sure minor adjustments will allow the pillar to fit on a skyline.. $100 firm in good knick

http://i169.photobucket.com/albums/u210/dr...alpillapexi.jpg

Dual pillar with two gauges greddy oil and greddy ext temp was fitted previously to a r32 skyline. $120 firm

http://i169.photobucket.com/albums/u210/dr...dhandgreddy.jpg

Also not sure how interested people may be.. but i may be willing to sell my original japanese number plate. hehehe.. Got it as a present from a friend in japan but i know there pretty popular here, was gonna hang it in my room but mehh.. i may wanan sell it :D

http://i169.photobucket.com/albums/u210/dr...numberplate.jpg

Im pretty busy atm and everything here is fairly bulky so i wont consider posting anything of. Pickup only or i may consider meeting you somewhere ( not as far as the city or anything.. just to a location that helps prevent you from gettin to lost around my area if your not from around northern suburbs)

Located in mill park melbourne

cheers guys

daniel

Link to comment
https://www.sau.com.au/forums/topic/155152-skyline-parts-for-sale/
Share on other sites

hey guys, theres about 5 of yous who are interested in taking the gauges of my hands. If any of yous are keen on making a better offer then what there advertised for then there yours. Im now willing to post items at your expense.

hey guys, theres about 5 of yous who are interested in taking the gauges of my hands. If any of yous are keen on making a better offer then what there advertised for then there yours. Im now willing to post items at your expense.

That sucks.....its always first in best dressed. A price is a price.

Yea hey i didn't know this was ebay... maybe a $1 NO RESERVE should be done with these...

I bid $1.50 >_<

when 5 people email you at literally the same time, each saying they want first dibs. What do you suggest. If your not interested then go post your unwanted opinions in anotehr thread thanks.

when 5 people email you at literally the same time, each saying they want first dibs. What do you suggest. If your not interested then go post your unwanted opinions in anotehr thread thanks.

Um right... I was only backing up what tridentt150v said, fair is fair after all... you cant ask for more than what you put... a price is a price... and i'm more than 100% sure that not everyone emailed you at the exact same time... but hey if they wana pay more then thats their choice...

I was actually interested in the R33 dash and S13 guage holder and guages... but if its like this then its all good...

Good luk wit sale dude >_<

Um right... I was only backing up what tridentt150v said, fair is fair after all... you cant ask for more than what you put... a price is a price... and i'm more than 100% sure that not everyone emailed you at the exact same time... but hey if they wana pay more then thats their choice...

I was actually interested in the R33 dash and S13 guage holder and guages... but if its like this then its all good...

Good luk wit sale dude >_<

your entilted to your opinion and its always first in best dressed, but within 5 mintues of posting the thread 5 people literally emailed me all saying they want it. Its not that easy to pick one at random.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...